BUD Industries

The CU-3284 is an Utilibox Style A Enclosure made of ABS (acrylonitrile butadiene styrene) with black textured finish. The plastic utility box comes with a close fitting interlocking lid and assembly...

The MB-1390-LG is an External Mounting Bracket made of acrylonitrile butadiene styrene (ABS) with light grey finish. This external mounting Bracket enables boxes to be wall or panel mounted without...

The PN-1334-C is a Box Enclosure made of polycarbonate with light grey body and clear cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB...

The CU-1872-B is an Utilibox Style F Enclosure made of ABS (acrylonitrile butadiene styrene) with black finish. The plastic utility box is comes with a close fitting interlocking lid and assembly...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:203.2mm

SpecificationEnclosure Type:MultipurposeEnclosure Material:ABSExternal Height - Metric:272.5mm

The AC-1402 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity...

The AC-1413 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The AS-5002-A is an Electronics Enclosure Sliding Mechanism made of steel with zinc plated finish. The alloy steel telescoping and linear motion mechanism consists of an outer member, inner member,...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABSExternal Height - Metric:199.9mm

The PA-1106-BT is a 6U surface shield Relay Rack Panel made of 0.12-inch thick aluminum alloy with black texture finish. This standard panel is suitable for all cabinets, cabinet racks, relay racks...

SpecificationEnclosure Type:ChassisEnclosure Material:AluminumExternal Height - Metric:38.1mm

The AC-1414 is an Aluminum Chassis with natural finish. It is suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity...

The NBX-10922 is a wall-mounting Bracket Kit for NEMA boxes, made of corrosion resistant stainless steel with natural finish. It is used to mount enclosures to walls, panels or any other flat surface...

The POS-194-S is a Rack Mount Power Outlet Strip made of 20-gauge steel with textured black finish. This surge suppressed strip is designed for 19-inch panel space open racks or enclosed cabinet...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:199.9mm

The USB-7201-G is a grey plastic Pocket-size Enclosure, specifically designed for USB applications. Durable Self-extinguishing High Impact ABS Plastic Material with...

The NBF-32346 is a Box Enclosure made of polybutylene terephthalate (PBT)/polycarbonate (PC) with light grey body and cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive...

The CU-476 is an Enclosure/Econobox made of die cast aluminum with natural finish. It comes with a close fitting flanged cover fastened to bosses in the body with screws. This plus the thickness of...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mm

The DNR-4790 is a DIN Mounting Rail made of 1mm thick steel with zinc plated finish. This mounting rail design features a 18 x 6.3mm oblong slots spaced at 25mm center to center provide flexibility...

The CU-789-MB is a style-E Plastic Utility Box made of acrylonitrile butadiene styrene (ABS) with black finish. It has moulded-in mounting brackets, comes with close fitting interlocking lid and...

The AC-408 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The SNB-3730 is a gray NEMA 4 Sheet Metal Box/Enclosure made of 16-gauge steel with smooth powder coated finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal...

The TS-15-A is a Tem-Stat Temperature Control Thermostat prevent shut-downs caused by over-heating of electronic or electrical equipment in enclosures. Units react quickly to gradual or sudden...

The NBA-10168 is a style-A non-metallic Box Enclosure made of blended plastic polycarbonate with light grey body and clear cover finish. This gasketed Enclosure used in many wet, dirty and/or...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mm

The DMB-4771 is a gray DIN rail mount Multi-board Box made of ABS (acrylonitrile butadiene styrene) and PC (polycarbonate). Snap-in multiple board capacity with easy access to board terminals, three...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABS, PolycarbonateExternal Height - Metric:199.9mm

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:37.59mm

The MB-14273 is a Rear Mounting Bracket for use with rack mount chassis in aluminum enclosure. Applications Industrial ...

The AC-1419 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity...

The BPA-1531 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural...

The PC-11491 is a Style F No-display Plastic Box made of ABS (acrylonitrile butadiene styrene). Highly decorative and versatile, sloped plastic desktop enclosure. The style F Plasticase comes...

The CU-3006-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built-in snap lock or...

The AC-1404 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The NG-9511 is a PG7 Cable Gland consists of black molded nylon body, hexagonal nut, cable nut and a rubber gasket and cable seal. Cable seal maintains NEMA rating for cable entry or exit. ...

The PN-1333-C is a Box Enclosure made of polycarbonate with light grey body and clear cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB...

The CU-742 is a black Utilibox™ Style D Box made of high impact polystyrene. It comes with close-fitting interlocking lid and provisions for mounting horizontal PCB. ...

The HH-3633 is a Battery Holder made of polypropylene with wire lead terminals. This battery has 4 battery or cells of AA size. This battery holder is suitable for through-hole mount. ...