BUD Industries

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:300mm

The AC-424 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The CU-881 is a small metal electronics Utility Cabinet Enclosure made of steel with natural finish. The economical cabinets have removable front and back panels. 20...

The NG-9513 is a 0.197 to 0.295-inch black Cable Gland made of nylon 6.6 (polyamide 6.6) body with nylon 6.6 nut, NBR seal and rubber washer gasket. PG11 mount thread. Suitable for use with NEMA-4X...

The PT-11743 is a style-I Plastic Box Enclosure made of acrylonitrile butadiene styrene (ABS) with black mar resistant textured surface. The base is securely attached to the cover with screws. ...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABSExternal Height - Metric:199.9mm

The NBX-10985-PL is an Internal Panel made of ABS plastic. It is a plastic accessory panel used with the NB series NEMA boxes that allows easy mounting of electronic devices in the box. It has unique...

The F-7264-A is a round screw mount Feet made of high-grade black plastic PE (polyethylene) with zinc plated finish and it is supplied with mounting hardware. 0.75"...

The C-14442 is a small rack-mount solid Chassis Cover made of 0.05-inch thick aluminum with natural finish. It is suitable for use with 19-inch rack. Applications ...

The AU-1029 is a small metal Utility Cabinet made of aluminum alloy with natural finish. This economical cabinet/small metal electronics enclosure has removable front and back panels. Panels affixed...

The CSB-1353 is a black Chassis Support Bracket made of heavy duty 14-gauge steel. It requires two pairs of panel mounting rails per cabinet rack. The bracket attaches to panel mounting rail...

The PC-11493 is a Style F Horizontal Display Plastic Box made of ABS (acrylonitrile butadiene styrene). Highly decorative and versatile, sloped plastic desktop enclosure. The style F Plasticase comes...

The SPB-3904 is a water-tight Push Button Box made from heavy duty 14-gauge steel seam welded construction. It cover has oil-resistant die-cut gasket for reliable and lasting protection against dust,...

The NBB-15240 is a light-gray NEMA Box with solid door, made of PC/PBT blended plastic. Most of these gasketed enclosures have been tested and approved to UL508-4x specifications, with a few being...

SpecificationEnclosure Type:InstrumentEnclosure Material:ABSExternal Height - Metric:89.9mm

SpecificationEnclosure Type:SmallEnclosure Material:SteelExternal Height - Metric:203.2mm

The F-7800-A is a round screw mount Feet made of high-grade black plastic PE (polyethylene) with zinc plated finish and it is supplied with mounting hardware. 0.87"...

The CU-729 is an Utility Cabinet made of 20-gauge steel with metallic gray finish. This small metal electronics enclosure has removable front and back panels. Ideal for electronic equipment, monitors...

SpecificationEnclosure Type:HandheldEnclosure Material:ABSExternal Height - Metric:169.9mm

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:406mm

The NG-9517 is a 0.709 to 0.945-inch black Cable Gland made of nylon 6.6 (polyamide 6.6) body with nylon 6.6 nut, NBR seal and rubber washer gasket. PG29 mount thread. Suitable for use with NEMA-4X...

The AC-414 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

SpecificationEnclosure Type:InstrumentEnclosure Material:ABSExternal Height - Metric:104.4mm

The CU-790 is a black Utilibox™ Style E Box made of ABS plastic. It comes with close-fitting interlocking lid and assembly hardware. -20 to 70°C Suggested service...

The AC-1431 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The AC-1427 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity...

The PA-1105-BT is a surface-shield Relay Rack Panel made of 0.12-inch thick standard aluminium alloy with black texture finish. It is suitable for use with all cabinets, cabinet racks and small...

The PN-1331 is a light-gray NEMA 4x Box made of polycarbonate. This polycarbonate molded enclosure meet NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB enclosures, junction boxes and...

The NBB-10247 is a Box Enclosure with water-tight plastic and fibreglass. It is made from blended plastic ABS/polycarbonate with light grey finish, suitable to use in many wet, dirty and/or corrosive...

The DCH-11924 is a sealed Dual-Compartment Enclosure made of high impact ABS body and blue tinted polycarbonate cover. It has hinged cover for frequent access and separate compartment for housing...

The CUR-3283 is an Utilibox Style A Recessed Enclosure made of ABS (acrylonitrile butadiene styrene) with black finish. The plastic utility box comes with a close fitting interlocking lid and...

The AB-1852 is an adapter Mounting Bracket made of steel with smooth black finish. It is used for mounting 19-inch wide equipment into open racks with 23-inch and 24-inch wide panel spaces and...

The CU-2107-B is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with smooth gray finish. The minibox has two sections slip together and may be joined by either built-in snap...

The AC-1422 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The PMR-9453 is a Panel Mounting Rail made of 12-gauge steel with smooth black finish. Suitable for use with cabinet racks series-60, series-2000, LPR rack, all American™, Classic II and Economizer™...

SpecificationBumper / Feet Mounting:AdhesiveHeight:3.2mmBumper / Feet Material:Rubber

The 7346 is a Machine Screw made of steel body with zinc plating. It is suitable for use with the mounting panels. It features truss head Phillips head style with 10-32 x 0.62-inch thread size. ...

The HH-3449 is a Battery Retainer Clip made of flexible vinyl with wire lead terminals. This retainer clip has 1 battery or cells of PP3 (9V) size. This clip with 9V battery holder is suitable for...

The CU-3285 is an Utilibox Style A Enclosure made of ABS (acrylonitrile butadiene styrene) with black textured finish. The plastic utility box comes with a close fitting interlocking lid and assembly...

The BPA-1519 is a Chassis Bottom Plate made from 0.040-inch thick aluminum with natural finish. It is used to protect wiring or components or as a dust cover on underside chassis. ...