BUD Industries

SpecificationEnclosure Type:InstrumentEnclosure Material:ABSExternal Height - Metric:119.9mmExternal Width - Metric:60mmExternal Depth - Metric:50mmIP Rating:IP54Body Color:GrayNEMA Rating:-External Height - Imperial:4.7"External Width - Imperial:2...

The RC-7762-PR is a ball-bearing Swivel type Caster mounts in all cabinet racks, made of steel with flat smooth black finish. It has hard tread rubber wheel and self lubricating. 240lbs Load rating Formed...

The NG-9514 is a 0.236 to 0.433-inch black Cable Gland made of nylon 6.6 (polyamide 6.6) body with nylon 6.6 nut, NBR seal and rubber washer gasket. PG13.5 mount thread. Suitable for use with NEMA-4X plastic boxes. 4.5Nm...

The PMR-9450 is a Panel Mounting Rail made of 12-gauge steel with smooth black finish. Suitable for use with cabinet racks series-60, series-2000, LPR rack, all American™, Classic II and Economizer™. 42" Panel space ...

The CU-3008-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built in snap lock or sheet metal screws. ...

The NBA-10148 is an UL/NEMA/IEC NBA Box with solid door, made of ABS (acrylonitrile butadiene styrene) or PC (polycarbonate) blended plastic with light gray finish. All enclosures meet NEMA 1, 4, 4x and IEC529-IP66 requirements, which allows them to be...

The CU-2103-B is a small metal Electronics Enclosure/Minibox made of 0.040-inch aluminum alloy with smooth gray finish. Two sections slip together and may be joined by either built in snap lock or sheet metal screws. Flanged sections assure proper...

The BPA-1505 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural finish. Applications ...

The BAS-5106 is an Universal Mounting Bracket Kit is recommended for both two-piece and three-piece slides subject to maximum chassis width. It is easy to assemble and allows slides to be mounted to panel mounting surface or accessory flanges of panel...

The PN-1322 is a Junction Box with grey PC (polycarbonate) body. It features smooth, flush top cover. Designed to IP65 of IEC 529 and NEMA-4x and 13 specifications. Cover attaching screws are outside the sealing area thus preventing ingress of moisture...

The DMB-4774 is a light gray DIN Rail mount Multi-board Box with ABS/PC blend plastic housing. Bottom level accepts PC board with modular type terminals on 0.2-inch centers. Removable terminal guards have snap-off tabs to match number of terminals used...

The NG-9516 is a 0.512 to 0.669-inch black Cable Gland made of nylon 6.6 (polyamide 6.6) body with nylon 6.6 nut, NBR seal and rubber washer gasket. PG21 mount thread. Suitable for use with NEMA-4X plastic boxes. 8.5Nm...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:300mmExternal Width - Metric:250mmExternal Depth - Metric:150mmIP Rating:IP66Body Color:NaturalNEMA Rating:NEMA 1, 2, 4, 4X, 12External Height -...

The NG-9512 is a PG9 Cable Gland consists of black molded nylon body, hexagonal nut, cable nut and a rubber gasket and cable seal. Cable seal maintains NEMA rating for cable entry or exit. Applications ...

The CU-2100-B is a small metal Electronics Enclosure/Minibox made of 0.040-inch aluminum alloy with smooth gray finish. Two sections slip together and may be joined by either built in snap lock or sheet metal screws. Flanged sections assure proper...

The SNB-3740 is a Box Enclosure made of powder coated steel with natural finish. This device includes hardware and clear zinc plate internal panel. It is well suited for outdoor and indoor applications requiring protection against liquids and corrosion...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mmExternal Width - Metric:203.2mmExternal Depth - Metric:152.4mmBody Color:GrayNEMA Rating:NEMA 1External Height - Imperial:10"External Width -...

The AC-401 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The AC-1429 is a multipurpose Chassis Enclosure with unfinished natural aluminum body. Welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support. Optional bottom...

The SH-2382 is a 19-inch non-ventilated Stationary Rack Shelf made of steel with smooth black finish. This stationary shelf comes in width fits 19-inch wide panel space and cabinet rack depth. The flanged front and rear to support up to 200lbs and...

The DB-4701 is a DIN Rail Mount Box made of ABS (acrylonitrile butadiene styrene) with light gray finish. External clamp type contacts have M3 screws and lock washers, internal solder tab contacts. Tin plated brass...

SpecificationAccessory Type:Clear Front Cover for DMB-4774For Use With:DMB-4774 DIN Rail Mount Multi-Board Box EnclosuresProduct Range:DMB SeriesDrawing SheetDownload Drawing Sheet | DMB-4774-CC

The CB-1371 is a rack-mount Panel Chassis made of 0.050-inch thick aluminium alloy with natural finish. It can be used as a vertical chassis where depth is limited or where front service is required. 5.28" Panel depth...

SpecificationEnclosure Type:Power SupplyEnclosure Material:PlasticExternal Height - Metric:78.2mmExternal Width - Metric:53mmExternal Depth - Metric:42mmBody Color:WhiteNEMA Rating:-External Height - Imperial:3.08"External Width - Imperial:2.08"External...

The CU-3005-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built in snap lock or sheet metal screws. ...

The CN-6709 is a Box Enclosure with mounting Bracket, made of die-cast aluminium alloy with natural finish. It has neoprene self-adhesive EPDM black gasket and self-threading stainless steel screws which easily attaches to cover. This box can be wall or...

The NBF-32334 is a Box Enclosure made of polybutylene terephthalate (PBT)/polycarbonate (PC) with light grey body and cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive environments. It has two or three plastic latches, comes...

The SN-3702 is a Sheet Metal Box Enclosure made of 14-gauge steel with smooth grey powder coat finish. This Box can be mounted without need to remove cover and expose internal components, easily machined and modified to particular requirements. The...

The ANS-3819 is a natural finish NEMA die-cast Aluminium Box with EMI/RFI shielding. It comes with one-piece moulded outer silicone gasket provides reliable and long lasting sealing to meet NEMA 4X and IP67 requirements. ...

The AU-1040 is a small metal Utility Cabinet made of aluminum alloy with natural finish. This economical cabinet/small metal electronics enclosure has removable front and back panels. Panels affixed with 6# sheet metal screws. ...

SpecificationEnclosure Type:SmallEnclosure Material:Diecast AluminumExternal Height - Metric:127.3mmExternal Width - Metric:165mmExternal Depth - Metric:77mmIP Rating:IP65, IP66Body Color:NaturalNEMA Rating:NEMA 1, 2, 4, 4X, 12, 13External Height -...

The KS-1785-BT is a 19-inch Sliding Keyboard and Mouse Shelf made of 18-gauge steel with black texture finish. Mouse pad slides out from underneath the shelf in either the right or left side, takes up 2-U (3.5-inch) of panel space. 16.50" Maximum...

The SNB-3732 is a NEMA 4 Sheet Metal Box with mounting bracket, made of continuous seam welded 16-gauge steel with smooth gray powder coat finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal. External mounting...

The SNB-3731 is a gray NEMA 4 Sheet Metal Box/Enclosure made of 16-gauge steel with smooth powder coated finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal. External mounting brackets allow box to be mounted on a...

SpecificationEnclosure Material:ABS, PolycarbonateExternal Height - Metric:-External Width - Metric:-For Use With:Bud UL/NEMA/IEC NBA and NBB Series OnlyExternal Height - Imperial:-External Width - Imperial:-Product Range:-Data SheetDownload Data Sheet |...

The PC-11414 is a style-B Plastic Box made of impact resistant polystyrene material with double textured PC bone grey finish. This sturdy enclosure is constructed using high quality plastic material and housing design allows complete accessibility to...

The CC-5191 is a Cable Carrier made of steel with zinc plated clear chromated finish. It allows the organization and protection of cables on slide-mounted equipment. Mounts to panel mounting rail at rear of cabinet rack and can be used on both the left...

SpecificationEnclosure Type:SmallEnclosure Material:Extruded AluminiumExternal Height - Metric:136.7mmExternal Width - Metric:80mmExternal Depth - Metric:40mmBody Color:SilverNEMA Rating:-External Height - Imperial:5.4"External Width - Imperial:3...

The IP-6130 is an Instrument case Enclosure made of economical ABS plastic with light grey top and bottom covers. It has internal circuit board horizontal mounting bosses and vertical card guides. UL94-HB Flammability...

The CU-1943 is a black Utilibox™ Style J Box without mounting bracket, made of ABS plastic. Internal PCB card guides accept both horizontal and vertical boards. Grid pattern on underside of cover for modification reference points. ...