Enclosures, Racks & Cabinets

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:203.2mmExternal Width - Metric:203.2mmExternal Depth - Metric:101.6mmIP Rating:IP20Body Color:GrayNEMA Rating:NEMA 1External Height - Imperial:8"External...

SpecificationEnclosure Type:MultipurposeEnclosure Material:ABSExternal Height - Metric:272.5mmExternal Width - Metric:172mmExternal Depth - Metric:110mmIP Rating:IP66Body Color:GrayNEMA Rating:NEMA 1, 4, 4XExternal Height - Imperial:10.7"External Width -...

The AC-1402 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support,...

The AC-1413 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The AS-5002-A is an Electronics Enclosure Sliding Mechanism made of steel with zinc plated finish. The alloy steel telescoping and linear motion mechanism consists of an outer member, inner member, ball retainer and ball bearings. It offers a smooth,...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABSExternal Height - Metric:199.9mmExternal Width - Metric:400mmExternal Depth - Metric:500mmIP Rating:IP66Body Color:GrayNEMA Rating:NEMA 1, 2, 4, 4xExternal Height - Imperial:7.9"External Width -...

The PA-1106-BT is a 6U surface shield Relay Rack Panel made of 0.12-inch thick aluminum alloy with black texture finish. This standard panel is suitable for all cabinets, cabinet racks, relay racks and small enclosures, where applicable. ...

SpecificationEnclosure Type:ChassisEnclosure Material:AluminumExternal Height - Metric:38.1mmExternal Width - Metric:102mmExternal Depth - Metric:152mmBody Color:NaturalNEMA Rating:-External Height - Imperial:1.5"External Width - Imperial:4"External...

The AC-1414 is an Aluminum Chassis with natural finish. It is suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support,...

The NBX-10922 is a wall-mounting Bracket Kit for NEMA boxes, made of corrosion resistant stainless steel with natural finish. It is used to mount enclosures to walls, panels or any other flat surface. Applications ...

The POS-194-S is a Rack Mount Power Outlet Strip made of 20-gauge steel with textured black finish. This surge suppressed strip is designed for 19-inch panel space open racks or enclosed cabinet. These units are easily installed to the panel mounting...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:199.9mmExternal Width - Metric:150mmExternal Depth - Metric:150mmIP Rating:IP66Body Color:GrayNEMA Rating:NEMA 1, 2, 4, 4X, 12External Height - Imperial:7...

The USB-7201-G is a grey plastic Pocket-size Enclosure, specifically designed for USB applications. Durable Self-extinguishing High Impact ABS Plastic Material with UL94-HB Flammability Rating Smooth Textured...

The NBF-32346 is a Box Enclosure made of polybutylene terephthalate (PBT)/polycarbonate (PC) with light grey body and cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive environments. It has two or three plastic latches, comes...

The CU-476 is an Enclosure/Econobox made of die cast aluminum with natural finish. It comes with a close fitting flanged cover fastened to bosses in the body with screws. This plus the thickness of the #ADC-12 aluminum alloy, offers excellent screening...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mmExternal Width - Metric:254mmExternal Depth - Metric:152.4mmBody Color:GrayNEMA Rating:NEMA 1External Height - Imperial:10"External Width -...

The DNR-4790 is a DIN Mounting Rail made of 1mm thick steel with zinc plated finish. This mounting rail design features a 18 x 6.3mm oblong slots spaced at 25mm center to center provide flexibility in mounting. Suitable for mounting Bud DIN rail mount...

The CU-789-MB is a style-E Plastic Utility Box made of acrylonitrile butadiene styrene (ABS) with black finish. It has moulded-in mounting brackets, comes with close fitting interlocking lid and assembly hardware. UL94V-0...

The AC-408 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The SNB-3730 is a gray NEMA 4 Sheet Metal Box/Enclosure made of 16-gauge steel with smooth powder coated finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal. External mounting brackets allow box to be mounted on a...

The NBA-10168 is a style-A non-metallic Box Enclosure made of blended plastic polycarbonate with light grey body and clear cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive environments. IP66,...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mmExternal Width - Metric:254mmExternal Depth - Metric:101.6mmIP Rating:IP20Body Color:GrayNEMA Rating:NEMA 1External Height - Imperial:10"External...

The DMB-4771 is a gray DIN rail mount Multi-board Box made of ABS (acrylonitrile butadiene styrene) and PC (polycarbonate). Snap-in multiple board capacity with easy access to board terminals, three levels of PC board mounting locations and bottom level...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABS, PolycarbonateExternal Height - Metric:199.9mmExternal Width - Metric:430mmExternal Depth - Metric:530mmIP Rating:IP66Body Color:GrayNEMA Rating:NEMA 1, 2, 4, 4XExternal Height - Imperial:7...

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:37.59mmExternal Width - Metric:95mmExternal Depth - Metric:48mmBody Color:GrayNEMA Rating:-External Height - Imperial:1.48"External Width - Imperial:3.73"External Depth...

The MB-14273 is a Rear Mounting Bracket for use with rack mount chassis in aluminum enclosure. Applications Industrial ...

The AC-1419 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support,...

The BPA-1531 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural finish. Applications ...

The PC-11491 is a Style F No-display Plastic Box made of ABS (acrylonitrile butadiene styrene). Highly decorative and versatile, sloped plastic desktop enclosure. The style F Plasticase comes complete with all assembly hardware and four rubber feet...

The CU-3006-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built-in snap lock or sheet metal screws. Units can be used as separate...

The AC-1404 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The PN-1333-C is a Box Enclosure made of polycarbonate with light grey body and clear cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB enclosures, junction boxes and other applications in the...

The CU-742 is a black Utilibox™ Style D Box made of high impact polystyrene. It comes with close-fitting interlocking lid and provisions for mounting horizontal PCB. UL94HB Flammability rating -40 to 70°C...

The RC-7761-PR is a Caster with ball-bearing mount in all cabinet racks which currently accept RC-7758-PR casters. Special shim kit (7761-KIT) needed when using RC-7761-PR casters with 2000-series and 60-series cabinets. ...

The CU-3281 is an Utilibox Style A Enclosure made of ABS (acrylonitrile butadiene styrene) with black textured finish. The plastic utility box comes with a close fitting interlocking lid and assembly hardware. Without...

The SFA-1836 is a surface-shield Relay Rack Panel made of 0.12-inch thick aluminium alloy with natural finish. The standard panels suitable for all cabinets, cabinet racks, relay racks and small enclosures where applicable. It has pressure-sensitive...

The PN-1323 is a NEMA 4X Box made of polycarbonate with light gray finish. This PN-series box is offered in style-1 version. Body or cover is UV stabilized. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing...

SpecificationEnclosure Type:Wall MountEnclosure Material:ABSExternal Height - Metric:99.8mmExternal Width - Metric:150mmExternal Depth - Metric:200mmIP Rating:IP66Body Color:GrayNEMA Rating:NEMA 1, 2, 4, 4xExternal Height - Imperial:3.93"External Width -...

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:79.2mmExternal Width - Metric:54mmExternal Depth - Metric:40mmBody Color:BlackNEMA Rating:-External Height - Imperial:3.12"External Width - Imperial:2.13"External Depth...

The IP-6137 is an Instrument case Enclosure made of economical ABS plastic with light grey top and bottom covers. It has internal circuit board horizontal mounting bosses and vertical card guides. UL94-HB Flammability...