Enclosures, Racks & Cabinets

The PA-1134-MG is a surface-shield Relay Rack Panel made of 0.12-inch thick hard aluminium alloy with metallic-grey texture finish. It is suitable for use with all cabinets, cabinet racks and small...

The JBH-4956-KO is a NEMA 1 Sheet Metal Box with hinged cover, made of heavy duty 16-gauge welded steel with durable smooth gray (ANSI 65) powder coat finish. This heavy duty sheet metal box is well...

The H-9174-B is a Handle made of aluminum with clear anodized finish. It is suitable for use with aluminum enclosures. Applications ...

The SB-2143 is a small metal Shadow Cabinet Electronics Enclosure made of steel with metallic grey finish. The recessed front panel and bevelled edges of body provide handsome styling and prevent...

The NBX-10981 is an Internal Panel made of 16-gauge galvanized steel. The device is attached to the mounting bosses of the cabinet and is used to mount equipment without drilling through enclosure...

The CU-347 is an aluminum Enclosure with close fitting flanged cover fastened to bosses in the body with screws. The thickness of the #ADC-12 aluminum alloy offers excellent screening properties. It...

The AU-1039 is a small metal Utility Cabinet made of aluminum alloy with natural finish. This economical cabinet/small metal electronics enclosure has removable front and back panels. Panels affixed...

SpecificationEnclosure Type:InstrumentEnclosure Material:ABSExternal Height - Metric:119.9mm

The RC-7762-PR is a ball-bearing Swivel type Caster mounts in all cabinet racks, made of steel with flat smooth black finish. It has hard tread rubber wheel and self lubricating. ...

The PMR-9450 is a Panel Mounting Rail made of 12-gauge steel with smooth black finish. Suitable for use with cabinet racks series-60, series-2000, LPR rack, all American™, Classic II and Economizer™...

The CU-3008-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built in snap lock or...

The NBA-10148 is an UL/NEMA/IEC NBA Box with solid door, made of ABS (acrylonitrile butadiene styrene) or PC (polycarbonate) blended plastic with light gray finish. All enclosures meet NEMA 1, 4, 4x...

The CU-2103-B is a small metal Electronics Enclosure/Minibox made of 0.040-inch aluminum alloy with smooth gray finish. Two sections slip together and may be joined by either built in snap lock or...

The BPA-1505 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural...

The BAS-5106 is an Universal Mounting Bracket Kit is recommended for both two-piece and three-piece slides subject to maximum chassis width. It is easy to assemble and allows slides to be mounted to...

The PN-1322 is a Junction Box with grey PC (polycarbonate) body. It features smooth, flush top cover. Designed to IP65 of IEC 529 and NEMA-4x and 13 specifications. Cover attaching screws are outside...

The DMB-4774 is a light gray DIN Rail mount Multi-board Box with ABS/PC blend plastic housing. Bottom level accepts PC board with modular type terminals on 0.2-inch centers. Removable terminal guards...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:300mm

The CU-2100-B is a small metal Electronics Enclosure/Minibox made of 0.040-inch aluminum alloy with smooth gray finish. Two sections slip together and may be joined by either built in snap lock or...

The SNB-3740 is a Box Enclosure made of powder coated steel with natural finish. This device includes hardware and clear zinc plate internal panel. It is well suited for outdoor and indoor...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mm

The AC-401 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides...

The AC-1429 is a multipurpose Chassis Enclosure with unfinished natural aluminum body. Welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional...

The SH-2382 is a 19-inch non-ventilated Stationary Rack Shelf made of steel with smooth black finish. This stationary shelf comes in width fits 19-inch wide panel space and cabinet rack depth. The...

The DB-4701 is a DIN Rail Mount Box made of ABS (acrylonitrile butadiene styrene) with light gray finish. External clamp type contacts have M3 screws and lock washers, internal solder tab contacts...

SpecificationAccessory Type:Clear Front Cover for DMB-4774For Use With:DMB-4774 DIN Rail Mount Multi-Board Box EnclosuresProduct Range

The CB-1371 is a rack-mount Panel Chassis made of 0.050-inch thick aluminium alloy with natural finish. It can be used as a vertical chassis where depth is limited or where front service is required...

SpecificationEnclosure Type:Power SupplyEnclosure Material:PlasticExternal Height - Metric:78.2mm

The CU-3005-A is a small metal Electronics Enclosure made of 0.04-inch aluminum alloy with natural finish. The minibox has two sections slip together and may be joined by either built in snap lock or...

The CN-6709 is a Box Enclosure with mounting Bracket, made of die-cast aluminium alloy with natural finish. It has neoprene self-adhesive EPDM black gasket and self-threading stainless steel screws...

The NBF-32334 is a Box Enclosure made of polybutylene terephthalate (PBT)/polycarbonate (PC) with light grey body and cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive...

The SN-3702 is a Sheet Metal Box Enclosure made of 14-gauge steel with smooth grey powder coat finish. This Box can be mounted without need to remove cover and expose internal components, easily...

The ANS-3819 is a natural finish NEMA die-cast Aluminium Box with EMI/RFI shielding. It comes with one-piece moulded outer silicone gasket provides reliable and long lasting sealing to meet NEMA 4X...

The AU-1040 is a small metal Utility Cabinet made of aluminum alloy with natural finish. This economical cabinet/small metal electronics enclosure has removable front and back panels. Panels affixed...

SpecificationEnclosure Type:SmallEnclosure Material:Diecast AluminumExternal Height - Metric:127.3mm

The KS-1785-BT is a 19-inch Sliding Keyboard and Mouse Shelf made of 18-gauge steel with black texture finish. Mouse pad slides out from underneath the shelf in either the right or left side, takes...

The SNB-3732 is a NEMA 4 Sheet Metal Box with mounting bracket, made of continuous seam welded 16-gauge steel with smooth gray powder coat finish. Hinged cover clamps to the base with keyed quarter...

The SNB-3731 is a gray NEMA 4 Sheet Metal Box/Enclosure made of 16-gauge steel with smooth powder coated finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal...

SpecificationEnclosure Material:ABS, PolycarbonateExternal Height - Metric:-External Width - Metric:-

The PC-11414 is a style-B Plastic Box made of impact resistant polystyrene material with double textured PC bone grey finish. This sturdy enclosure is constructed using high quality plastic material...