C | Logline

The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (frequency: 2 to 200 Hz)...

The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (frequency: 2 to 200 Hz)...

To fasten sensors with max. diameters of 18 mm. Ideal for fastening on flat irons. An auxiliary cam for shafts with diameters of up to 25 - 40 mm is included in the delivery. ...

The sensor consists of a cylindrical nickel-plated metal body with M18 thread and 2 thin nuts. The cable output is located at the rear. Laterally, there is a yellow LED lighted in an attenuated state...

To fasten sensors with max. diameters of 18 mm. For universal mounting. An auxiliary cam for shafts with diameters of up to 25 - 40 mm is included in the delivery. ...

The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for capturing the speed. Pulses...

The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for capturing the speed. Pulses...

The fan timer relay was designed especially for controlling two-level motors. Response and switch-off delay can be adjusted separately and infinitely. A two-level switch is used for activation. The...

The fan timer relay was designed especially for controlling two-level motors. Response and switch-off delay can be adjusted separately and infinitely. A two-level switch is used for activation. The...

Plastic holding bracket for securing the relay in the relay socket. It avoids that the relay gets loose due to vibrations. ResourcesHolding bracket plastic for R274 |...

Metal holding bracket for securing the relay in the relay socket. It avoids that the relay gets loose due to vibrations. ResourcesMetal holding bracket | 817133View...

The connecting bridge easily connects the terminal blocks of the 14-pole Industry sockets 110175 and 110178, without having to wire them individually. The connecting bridge has 5 poles and is...

RC module for 230 V AC or 24 V AC to suppress interference. for relay modules of the RM series and 14-pole Industry sockets ResourcesRC Module 230 V AC |...

RC module for 230 V AC or 24 V AC to suppress interference. for relay modules of the RM series and 14-pole Industry sockets ResourcesRC Module 24 V AC |...

To be placed on the ends of the connecting bridge. The end mount completely insulates the comb-type back to provide finger protection. Material: PC Makrolon 2805 mat finish,...

The labeling plate was designed especially for coupling modules with switch because the labeling cannot be attached to the coupling module due to the incorporated switch. ...

The connecting bridge easily connects the terminal blocks of the coupling modules of series KRA-M4/M6/M8, without having to wire them individually. The connecting bridge has 10 poles and is available...

The labeling plate was designed especially for analog encoders with spring-clamp terminals. Great importance was attached to an area for the device tag and one for identification. ...

The labeling plate was designed especially for coupling modules with spring-clamp terminal blocks of the series F8 and F10. Great importance was attached to an area for the device tag and one for...

The connecting bridge easily connects the terminal blocks A1 and/or A2 of the coupling modules of series F8 and F10 by just plugging in, without having to wire the individual leads. The connecting...

14-pole relay socket with spring-loaded terminals for commercially available industrial relays. All metal parts are arranged under cover to protect them against contact. The relay socket matches to...

14-pole relay socket for commercially available industrial relays with screw-type terminals. All metal parts are arranged under cover to protect them against contact. The relay socket matches R274...

14-pole relay socket for commercially available industrial relays with screw-type terminals. All metal parts are arranged under cover to protect them against contact. The relay socket matches MC274. ...

The diode module is equipped with 11 diodes. The anodes of the diodes are all connected to each other. The module is used for failure indication systems (lamp tests). common...

The diode module is equipped with 11 diodes. The cathodes of the diodes are all connected to each other. The module is used for failure indication systems (collective fault message). ...

The diode module is equipped with 7 diodes. The anodes of the diodes are all connected to each other. The module is used for failure indication systems (lamp tests). common...

The diode module is equipped with 7 diodes. The cathodes of the diodes are all connected to each other. The module is used for failure indication systems (collective fault message). ...

The diode module is equipped with 4 individual diodes. The modules are used for inverse-polarity protection, decoupling and arc extinction. individual circuit ...

When a fault message is applied, an alarm signal, a flashing signal and a horn relay are activated. The horn relay can be switched off by means of the incorporated pushbutton or an externally applied...

The lamp test module combines several functions in one module (individual and collective messages and lamp test). The incoming fault messages are applied to the inputs (1, 3, 5, 7, 9, 11, 13). The...

The annunciator module can indicate to 10 incoming messages by means of a relay. The relay is activated as soon as a voltage is applied to min. one of the 10 inputs. The supply voltage has to be...

The annunciator module can indicate to 10 incoming messages by means of a relay. The relay is activated as soon as a voltage is applied to min. one of the 10 inputs. The supply voltage has to be...

The timer relay is used for pulse prolongation. When the control contact is closed min. 5 ms, the relay is activated and releases after the adjusted pulse time has lapsed. Further control pulses...

The timer relay is used for pulse prolongation. When the control contact is closed min. 5 ms, the relay is activated and releases after the adjusted pulse time has lapsed. Further control pulses...

The analog/digital converter ADU-C12 processes input voltages from 0 to 7.5 V DC in 0.5 V steps. The digital outputs switch according to the applied input voltage. The outputs are updated every 1.5...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to...

The coupling module is designed for two-level motor control. Connection with screw type terminal blocks Interlocked relays Manual control level Resources KRZ-E08 HR2 24 V AC/DC |...