Description
The Jonard Tools CAT6A RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6e, CAT6A, and CAT7A network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:
- Connectors are shielded with nickel-plated brass to reduce damage if the cable is accidently pulled
- 50 ?in gold plating on contact surfaces provides greater signal quality than the competition
- Tripoint-type prongs allow you to use stranded or solid CAT6e, CAT6A, and CAT7 cables
- Simplify twisted pair network cable termination by allowing the wires to pass through the connector
- Advantage of the pass-through feature is that you do not have to measure and cut the wires before termination, which can lead to having poor connection and signal loss
- Clear housing allows the operator to see the wire pairs easily
Specifications +
| Number of Connectors | 100 |
|---|---|
| Cable Type | CAT6e, CAT6A and CAT7 |
| Cable Diameter | 26 - 23 AWG (5 - 8 mm) |
| Connector Type | Three-prong RJ45 |
| Plating Thickness | 50 micro-inches |
| Housing Material | Polycarbonate, Nickel-plated Brass |
| Standards | ANSI/TIA-568-C.2, UL 1863, FCC Part 68 subpart F |
| Operating Temperature | -10°C to 60°C |
| Product Material | Nickel |
| Weight | 0.84 lb (383.176 g) |
| UPC # | 810053351932 |
| Data Sheet | Download Data Sheet | RJ456A-SC |
