Enclosure, Rack & Cabinet Accessories

SpecificationCover Type:Potting Box CoverAccessory Type:Cover, 1578 Series, Pack 10Cover Material:ABS

SpecificationSlide Type:TelescopingLength:20"Extended Length:40.88mBeari

SpecificationEnclosure Material:ABSExternal Height - Metric:26.67mmExternal Width - Metric:37mm

The PA-1104-BT is a Cabinet Rack Panel with black aluminum body. Suitable for all cabinets, cabinet racks, relay racks and small enclosures. Metallic grey finish ...

The SA-1753-BT is a 19-inch ventilated Equipment Open Rack Shelf made of 16-gauge steel with black texture finish and is flanged for added support. Open rack shelves fit 19 and 23-inch wide panel...

SpecificationAccessory Type:Chassis Bottom PlatePlate Type:BottomPlate Material:Aluminum

The DNC-4796 is a Mounting Clip that allows mounting of small enclosures and other devices that don't have a built-in DIN rail mounting flange to a 35mm DIN rail. It is easy to install and requires...

The BPA-1527 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural...

The H-9166-B is a Handle made of brass with chrome plated finish. It includes two 6-32 x 0.50-inch screws. 1.9"-Mounting centre ...

SpecificationEnclosure Material:SteelExternal Height - Metric:55.6mmExternal Width - Metric:800.1mm

SpecificationPanel Type:Inner PanelPanel Material:PlasticBody Color:Gray

Applications Industrial SpecificationNo. of Outlets:4Outlets

SpecificationEnclosure Material:ABSBody Color:GrayFor Use With:Cabinet Racks

The SH-2386 is a black Ventilated Stationary Shelf made of 16-gauge steel. Stationary shelves come in widths to fit 19 and 24-inch wide panel spaces and all cabinet rack depths. All shelves come with...

The C-14242 is a Rack-mount Internal Chassis made of 0.090-inch aluminum with natural finish. It can be mounted vertically or horizontally. The internal chassis is ideal for use with rack-mount...

The 57-58 is a PCB Mounting Kit for AN-series NEMA box. Applications Industrial ...

The SH-2385 is a 19-inch Rack Ventilated Stationary Shelves made of 16-gauge steel with smooth black finish. Flanged front and rear to support up to 200lbs. It come in widths to fit 19-inch and...

The PA-1134-MG is a surface-shield Relay Rack Panel made of 0.12-inch thick hard aluminium alloy with metallic-grey texture finish. It is suitable for use with all cabinets, cabinet racks and small...

The H-9174-B is a Handle made of aluminum with clear anodized finish. It is suitable for use with aluminum enclosures. Applications ...

The NBX-10981 is an Internal Panel made of 16-gauge galvanized steel. The device is attached to the mounting bosses of the cabinet and is used to mount equipment without drilling through enclosure...

The RC-7762-PR is a ball-bearing Swivel type Caster mounts in all cabinet racks, made of steel with flat smooth black finish. It has hard tread rubber wheel and self lubricating. ...

The PMR-9450 is a Panel Mounting Rail made of 12-gauge steel with smooth black finish. Suitable for use with cabinet racks series-60, series-2000, LPR rack, all American™, Classic II and Economizer™...

The BPA-1505 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural...

The BAS-5106 is an Universal Mounting Bracket Kit is recommended for both two-piece and three-piece slides subject to maximum chassis width. It is easy to assemble and allows slides to be mounted to...

The SH-2382 is a 19-inch non-ventilated Stationary Rack Shelf made of steel with smooth black finish. This stationary shelf comes in width fits 19-inch wide panel space and cabinet rack depth. The...

SpecificationAccessory Type:Clear Front Cover for DMB-4774For Use With:DMB-4774 DIN Rail Mount Multi-Board Box EnclosuresProduct Range

The CB-1371 is a rack-mount Panel Chassis made of 0.050-inch thick aluminium alloy with natural finish. It can be used as a vertical chassis where depth is limited or where front service is required...

The KS-1785-BT is a 19-inch Sliding Keyboard and Mouse Shelf made of 18-gauge steel with black texture finish. Mouse pad slides out from underneath the shelf in either the right or left side, takes...

SpecificationEnclosure Material:ABS, PolycarbonateExternal Height - Metric:-External Width - Metric:-

The CC-5191 is a Cable Carrier made of steel with zinc plated clear chromated finish. It allows the organization and protection of cables on slide-mounted equipment. Mounts to panel mounting rail at...

The NBX-10985-PL is an Internal Panel made of ABS plastic. It is a plastic accessory panel used with the NB series NEMA boxes that allows easy mounting of electronic devices in the box. It has unique...

The C-14442 is a small rack-mount solid Chassis Cover made of 0.05-inch thick aluminum with natural finish. It is suitable for use with 19-inch rack. Applications ...

The CSB-1353 is a black Chassis Support Bracket made of heavy duty 14-gauge steel. It requires two pairs of panel mounting rails per cabinet rack. The bracket attaches to panel mounting rail...

The PA-1105-BT is a surface-shield Relay Rack Panel made of 0.12-inch thick standard aluminium alloy with black texture finish. It is suitable for use with all cabinets, cabinet racks and small...

The AB-1852 is an adapter Mounting Bracket made of steel with smooth black finish. It is used for mounting 19-inch wide equipment into open racks with 23-inch and 24-inch wide panel spaces and...

The PMR-9453 is a Panel Mounting Rail made of 12-gauge steel with smooth black finish. Suitable for use with cabinet racks series-60, series-2000, LPR rack, all American™, Classic II and Economizer™...

The BPA-1519 is a Chassis Bottom Plate made from 0.040-inch thick aluminum with natural finish. It is used to protect wiring or components or as a dust cover on underside chassis. ...

The MB-1390-LG is an External Mounting Bracket made of acrylonitrile butadiene styrene (ABS) with light grey finish. This external mounting Bracket enables boxes to be wall or panel mounted without...

The AS-5002-A is an Electronics Enclosure Sliding Mechanism made of steel with zinc plated finish. The alloy steel telescoping and linear motion mechanism consists of an outer member, inner member,...

The PA-1106-BT is a 6U surface shield Relay Rack Panel made of 0.12-inch thick aluminum alloy with black texture finish. This standard panel is suitable for all cabinets, cabinet racks, relay racks...