Enclosures, Racks & Cabinets

The SN-3701 is a Sheet Metal Box Enclosure made of 14-gauge steel with smooth grey powder coat finish. This Box can be mounted without need to remove cover and expose internal components, easily machined and modified to particular requirements. The...

The PN-1340-C is a NEMA 4X Box made of polycarbonate with light gray finish body and clear polycarbonate cover. This PN-series box is offered in style-2 version. Body or cover is UV stabilized. Wall mounting holes and cover attaching screws are outside...

The SNB-3734 is a gray NEMA 4 Sheet Metal Box/Enclosure made of 16-gauge steel with smooth powder coated finish. Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal. External mounting brackets allow box to be mounted on a...

The NBF-32016 is a Style A NEMA Enclosure made of ABS (acrylonitrile butadiene styrene). This NBF-series gasketed enclosure which allows them to be used in many wet, dirty and/or corrosive environments. Comes complete with stainless steel wall mounting...

The NBD-10452 is a style-D non-metallic Box Enclosure made of blended plastic acrylonitrile butadiene styrene/polycarbonate with light grey finish. It is suitable for many wet, dirty and corrosive environments. IP66,...

The CU-741 is an Utilibox Style D Utility Box made of high impact polystyrene with black finish. This plastic box comes with close fitting interlocking lid and assembly hardware. Provisions for mounting horizontal PCB...

The PN-1328 is a style 1 NEMA 4X Box made of polycarbonate with light gray finish. Body or cover is UV stabilized. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. This PN-series...

The PN-1332-DG is a Box Enclosure made of high-impact ABS plastic with dark grey body and cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB enclosures, junction boxes and other applications in the...

The AC-404 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The POS-195-S is a rack-mount Power Outlet Strip is surge suppressed for use with your sensitive equipment. Have outlets located either on the front surface or on the rear surface for maximum versatility. Have 15ft long power cords with standard 3-prong...

The CU-4347 is an Econobox with mounting bracket suited for Enclosures made of die-cast aluminium alloy with natural finish. The box with external mounting brackets increases both adaptability and use. It offers excellent screening properties and it can...

The CU-1947 is an Utilibox Style J Enclosure made of ABS (acrylonitrile butadiene styrene) with black finish. This plastic utility box has internal PCB card guides to accept both horizontal and vertical boards, grid pattern on underside of cover for...

The CS-11210-BT is a Champion Electronics Cabinet made of thick aluminium with black texture finish. It has ventilation slots in bottom and rear panel, eight self-threading screws for easy assembling and no screws on front or rear panels. This Cabinet...

The CU-3011-A is a small metal Electronics Enclosure/Minibox made of 0.040-inch aluminum alloy with natural finish. Two sections slip together and may be joined by either built in snap lock or sheet metal screws. Flanged sections assure proper shielding...

SpecificationEnclosure Type:InstrumentEnclosure Material:AluminumExternal Height - Metric:203.2mmExternal Width - Metric:229mmExternal Depth - Metric:203mmBody Color:BlackNEMA Rating:-External Height - Imperial:8"External Width - Imperial:9"External...

The PA-1101-MG is a 1U surface shield Relay Rack Panel made of 0.12-inch thick aluminum alloy with metallic gray (MG) finish. This standard panel is suitable for all cabinets, cabinet racks, relay racks and small enclosures, where applicable. ...

The NBF-32026 is a Wall mount Enclosure with light grey ABS (acrylonitrile butadiene styrene) body. It is used to mount customer equipment inside enclosures. Used to attach equipment or panels to internal mounting bosses and brackets to the outside rear...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:254mmExternal Width - Metric:203.2mmExternal Depth - Metric:101.6mmIP Rating:IP20Body Color:GrayNEMA Rating:NEMA 1External Height - Imperial:10"External...

SpecificationEnclosure Type:Potting BoxEnclosure Material:ABSExternal Height - Metric:69.1mmExternal Width - Metric:48mmExternal Depth - Metric:35mmBody Color:BlackNEMA Rating:-External Height - Imperial:2.72"External Width - Imperial:1.9"External Depth...

The DMB-4770 is a gray DIN rail mount Multi-board Box made of ABS (acrylonitrile butadiene styrene) and PC (polycarbonate). Snap-in multiple board capacity with easy access to board terminals, three levels of PC board mounting locations and bottom level...

The ARR-1272-NF is a 2-post ARR Rack made of aluminum with natural finish. ARR is ideal for installation where easy access to components is a top priority. Each built for years of solid, trouble-free service, as well as obvious ease of service where...

The AC-415 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support,...

The SNB-3737 is a NEMA-4 Sheet Metal Box with continuous seam welded 16-gauge steel or stainless steel construction. This SNB-series has external mounting brackets allow box to be mounted on a wall or panel without having to remove the cover and exposing...

The EX-4500 is a small metal electronics Box Enclosure made of extruded aluminium with silver housing finish and black plastic bezels. This Enclosure offers an alternative to the standard die cast or fabricated aluminium box. ...

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:43.43mmExternal Width - Metric:68mmExternal Depth - Metric:130mmBody Color:BlackNEMA Rating:-External Height - Imperial:1.71"External Width - Imperial:2.68"External...

The CM-1225 is a Cable Management Panel with plastic clips, made of steel with smooth black finish. It is designed for 19-inch panel width racks and includes all mounting hardware. Applications ...

The BT-2723 is a transparent Box Enclosure made of polycarbonate with blue finish. It is ideal for PCB enclosures, test equipment and other applications in the electrical and electronic industries. This plastic enclosure allows easy monitoring of...

SpecificationEnclosure Type:Electrical / IndustrialEnclosure Material:SteelExternal Height - Metric:152.4mmExternal Width - Metric:152.4mmExternal Depth - Metric:101.6mmIP Rating:IP20Body Color:GrayNEMA Rating:NEMA 1External Height - Imperial:6"External...

The CN-5703 is a Box Enclosure made of die-cast aluminium alloy with natural finish. It has neoprene self-adhesive EPDM black gasket and self-threading stainless steel screws which easily attaches to cover. IP66, NEMA-1, 2, 4x, 12, 13 Protection...

The PN-1333 is a Box Enclosure made of polycarbonate with light grey body and cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB enclosures, junction boxes and other applications in the electrical...

The NBF-32010 is a style A NEMA Box with solid door, made of ABS (acrylonitrile butadiene styrene) with light gray finish. The NBF-series enclosure designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. This indoor enclosure allows to be...

The CS-11212-BT is an Electronic Cabinet made of 0.05-inch aluminum with black texture finish, smooth white front and rear panels. The champion series cabinet is easily assembled with eight self-threading screws. Ventilation slots in bottom and rear...

The PB-1559 is a Style-A potting Plastic Box Enclosure made of thermoplastic ABS with black textured finish. This enclosure is well suited for all types of applications requiring complete sealing of component parts with potting compounds. ...

SpecificationEnclosure Material:Stainless SteelExternal Height - Metric:43.18mmExternal Width - Metric:18mmFor Use With:UL/NEMA/IEC Plastic BoxesExternal Height - Imperial:1.7"External Width - Imperial:0.7"Product Range:-Data SheetDownload Data Sheet |...

The PC-11495 is a Style F Horizontal Display Plastic Box made of ABS (acrylonitrile butadiene styrene). Vertical display version. The style F Plasticase comes complete with all assembly hardware and four rubber feet. Easily modified with common machine...

The CN-5711 is a Box Enclosure made of die-cast aluminium alloy with natural finish. It has neoprene self-adhesive EPDM black gasket and self-threading stainless steel screws which easily attaches to cover. IP66, NEMA-1,...

The SNC-3756 is a Sheet Metal Box Enclosure made of 16-gauge steel with smooth grey powder coat finish and lift-off screw cover. The screw mounted lift-off cover facilitates machining and assembly of components. It includes zinc plated removable internal...

SpecificationEnclosure Type:SmallEnclosure Material:Diecast AluminumExternal Height - Metric:38.1mmExternal Width - Metric:119mmExternal Depth - Metric:188mmBody Color:NaturalNEMA Rating:-External Height - Imperial:1.5"External Width - Imperial:4...

The CU-123 is a Multipurpose Enclosure made of die-cast aluminum with natural finish. This plus the thickness of the aluminum alloy, offers excellent screening properties. This lightweight, easy to machine die-cast aluminum enclosure/Econobox has a...

The PA-1104-MG is a Surface Shield Panel made of 0.12-inch thick aluminum with metallic gray finish. Standard panels for all cabinets, cabinet racks, relay racks and small enclosures, where applicable. Fits telephone and...