Metz Connect

The speed and V-belt monitor is used for monitoring the rotary movement (insufficient speed) of motor and V-belt driven shafts. Inductive proximity switches are used for capturing the speed. Pulses...

The fan timer relay was designed especially for controlling two-level motors. Response and switch-off delay can be adjusted separately and infinitely. A two-level switch is used for activation. The...

The fan timer relay was designed especially for controlling two-level motors. Response and switch-off delay can be adjusted separately and infinitely. A two-level switch is used for activation. The...

Plastic holding bracket for securing the relay in the relay socket. It avoids that the relay gets loose due to vibrations. ResourcesHolding bracket plastic for R274 |...

Metal holding bracket for securing the relay in the relay socket. It avoids that the relay gets loose due to vibrations. ResourcesMetal holding bracket | 817133View...

The connecting bridge easily connects the terminal blocks of the 14-pole Industry sockets 110175 and 110178, without having to wire them individually. The connecting bridge has 5 poles and is...

RC module for 230 V AC or 24 V AC to suppress interference. for relay modules of the RM series and 14-pole Industry sockets ResourcesRC Module 230 V AC |...

RC module for 230 V AC or 24 V AC to suppress interference. for relay modules of the RM series and 14-pole Industry sockets ResourcesRC Module 24 V AC |...

To be placed on the ends of the connecting bridge. The end mount completely insulates the comb-type back to provide finger protection. Material: PC Makrolon 2805 mat finish,...

The labeling plate was designed especially for coupling modules with switch because the labeling cannot be attached to the coupling module due to the incorporated switch. ...

The connecting bridge easily connects the terminal blocks of the coupling modules of series KRA-M4/M6/M8, without having to wire them individually. The connecting bridge has 10 poles and is available...

The labeling plate was designed especially for analog encoders with spring-clamp terminals. Great importance was attached to an area for the device tag and one for identification. ...