Metz Connect

To be placed on the ends of the connecting bridge. The end mount completely insulates the comb-type back to provide finger protection. Material: PC Makrolon 2805 mat finish, eroded ResourcesEnd Mount |...

The labeling plate was designed especially for coupling modules with switch because the labeling cannot be attached to the coupling module due to the incorporated switch. Material: PA 66, flame retardant and self-extinguishing to...

The connecting bridge easily connects the terminal blocks of the coupling modules of series KRA-M4/M6/M8, without having to wire them individually. The connecting bridge has 10 poles and is available with grid dimension 11.5 mm. The end mounts completely...

The labeling plate was designed especially for analog encoders with spring-clamp terminals. Great importance was attached to an area for the device tag and one for identification. Material: ABS, transparent ...

The labeling plate was designed especially for coupling modules with spring-clamp terminal blocks of the series F8 and F10. Great importance was attached to an area for the device tag and one for identification. Material: ABS,...

The connecting bridge easily connects the terminal blocks A1 and/or A2 of the coupling modules of series F8 and F10 by just plugging in, without having to wire the individual leads. The connecting bridge has 10 poles and is available with grid dimension...

14-pole relay socket with spring-loaded terminals for commercially available industrial relays. All metal parts are arranged under cover to protect them against contact. The relay socket matches to industrial relay MC274. Electronic modules, such as LED...

14-pole relay socket for commercially available industrial relays with screw-type terminals. All metal parts are arranged under cover to protect them against contact. The relay socket matches R274. Electronic modules, such as LED or RC modules, can be...

14-pole relay socket for commercially available industrial relays with screw-type terminals. All metal parts are arranged under cover to protect them against contact. The relay socket matches MC274. Optional bracket ...

Compact, pluggable relay for industrial use. Socket pins as soldering lugs mechanical switch position display With manual test button cadmium-free contacts LED-Indicator ...

Compact, pluggable relay for industrial use. Socket pins as soldering lugs Mechanical switch position display With manual test button Cadmium-free contacts LED-Indicator ...

Compact, pluggable relay for industrial use. Socket pins as soldering lugs Mechanical switch position display With manual test button Cadmium-free contacts LED-Indicator ...

The diode module is equipped with 11 diodes. The anodes of the diodes are all connected to each other. The module is used for failure indication systems (lamp tests). common anode Connection with screw-type terminals ...

The diode module is equipped with 11 diodes. The cathodes of the diodes are all connected to each other. The module is used for failure indication systems (collective fault message). common cathode Connection with...

The diode module is equipped with 7 diodes. The anodes of the diodes are all connected to each other. The module is used for failure indication systems (lamp tests). common anode Connection with screw-type terminals ...

The diode module is equipped with 7 diodes. The cathodes of the diodes are all connected to each other. The module is used for failure indication systems (collective fault message). common cathode Connection with...

The diode module is equipped with 4 individual diodes. The modules are used for inverse-polarity protection, decoupling and arc extinction. individual circuit Connection with screw-type terminals ...

When a fault message is applied, an alarm signal, a flashing signal and a horn relay are activated. The horn relay can be switched off by means of the incorporated pushbutton or an externally applied signal. An active alarm signal is shown as long as it...

The lamp test module combines several functions in one module (individual and collective messages and lamp test). The incoming fault messages are applied to the inputs (1, 3, 5, 7, 9, 11, 13). The signal lamps are connected to the outputs (2, 4, 6, 8,...

The annunciator module can indicate to 10 incoming messages by means of a relay. The relay is activated as soon as a voltage is applied to min. one of the 10 inputs. The supply voltage has to be applied continuously to the terminals L1 - N. Several...

The annunciator module can indicate to 10 incoming messages by means of a relay. The relay is activated as soon as a voltage is applied to min. one of the 10 inputs. The supply voltage has to be applied continuously to the terminals L1 - N. Several...

The timer relay is used for pulse prolongation. When the control contact is closed min. 5 ms, the relay is activated and releases after the adjusted pulse time has lapsed. Further control pulses during the pulse time do not have any effect. ...

The timer relay is used for pulse prolongation. When the control contact is closed min. 5 ms, the relay is activated and releases after the adjusted pulse time has lapsed. Further control pulses during the pulse time do not have any effect. ...

The analog/digital converter ADU-C12 processes input voltages from 0 to 7.5 V DC in 0.5 V steps. The digital outputs switch according to the applied input voltage. The outputs are updated every 1.5 seconds, and the switching state is signalized by means...

The analog/digital converter ADU-C12 processes input voltages from 0 to 7.5 V DC in 0.5 V steps. The digital outputs switch according to the applied input voltage. The outputs are updated every 1.5 seconds, and the switching state is signalized by means...

The digital/analog converter is designed to convert contacts into an analog signal. The inputs are scanned in steps of 0.5 V. They can be connected to and scanned at a compact control with an analog input (0-10 V). The bridged inputs are signalized by...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals...

The coupling module is designed for two-level motor control. Connection with spring clamp terminal blocks (push-in) Interlocked relays Manual control level ResourcesKRZ-F-E08 HR2 24 V...

The coupling module is designed for two-level motor control. Connection with screw type terminal blocks Interlocked relays Manual control level ResourcesKRZ-E08 HR2 24 V AC/DC |...

The coupling module is designed for two-level motor control. Connection with spring clamp terminal blocks (push-in) Interlocked relays Manual control level ResourcesKRZ-F-E08 HR 24 V...

The coupling module is designed for two-level motor control. Connection with screw type terminal blocks Interlocked relays Manual control level ResourcesKRZ-E08 HR 24 V AC/DC |...

The threshold gate switches units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay is activated. When the input voltage falls below the switch-off threshold, the relay is released again. The module is...

The threshold gate switches units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay is activated. When the input voltage falls below the switch-off threshold, the relay is released again. The module is...