AFL

AFL's KR036961001 36 fiber Singlemode Indoor/Outdoor Riser Multi-Unit Tight Buffered Fiber Optic cable features waterblocked 12 fiber helically stranded sub-units. The sub-units contain a water-swellable aramid and 12 tight buffered fibers. For indoor...

AFL ZA0025301001 2 fiber 50/125 OM2 zipcord cable provides links to the future for such protocols as FDDI, 10 Gigabit Ethernet, ATM, and Fibre Channel. Connections are easy to terminate with this flexible, two-fiber design.  Fiber: 50 um Multimode...

AFL's PM-L-06-PLC-4-S-01 6 Fiber LC Multimode OM4 Poli-MOD Patch and Splice Module is an innovative patch and splice module, which offers an inventive and effective means to accommodate 6 singlemode fiber interconnections in an...

AFL's LG-250-U-0 LightGuard 250 is a sealed dome closure designed for medium count fiber splicing (up to 144 single or 432 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required, the LG-250 is...

AFL FUSE-LC9SMU-6 Singlemode LC/UPC FUSEConnect fusion-splice connectors offer improved optical performance,  and reliability over mechanical connectors at only a marginal cost increase.AFL FUSEConnect Splice-On connectors utilizes a fusion splicer...

AFL’s FUSE-LC9M62-6 OM1 Multimode LC/PC FUSEConnect fusion-splice connectors offer improved optical performance, and reliability over mechanical connectors at only a marginal cost increase.AFL FUSEConnect Splice-On connectors utilize a fusion...

AFL's LG-150-U-0 LightGuard 150 Fiber Splice Enclosure is a sealed dome closure designed for small count fiber splicing ( Supports stranded loose tube, Uniflex® or ribbon fiber cables in either armored or dielectric configurations Fully sealed to...

AFL’s FUSE-LC9M50L-6 Multimode LC/PC FUSEConnect fusion-splice connectors offer improved optical performance, and reliability over mechanical connectors at only a marginal cost increase.AFL FUSEConnect Splice-On connectors utilize a fusion...

AFL's KR072961001 72 fiber Singlemode Indoor/Outdoor Multi-Unit Riser Tight Buffered Fiber Optic cable features 5 waterblocked 12 fiber helically stranded sub-units. The sub-units contain a water-swellable aramid and 12 tight buffered fibers.For indoor...

AFL FUSE-ST9SMU-6 Singlemode ST/PC FUSEConnect fusion-spliced connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished ferrule...

AFL's KR060961001 60 fiber Singlemode Indoor/Outdoor Multi-Unit Riser Tight Buffered Fiber Optic cable features 5 waterblocked 12 fiber helically stranded sub-units. The sub-units contain a water-swellable aramid and 12 tight buffered fibers.For indoor...

AFL FUSE-ST9M50L-6 Multimode OM1 ST/PC FUSEConnect fusion-spliced connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished ferrule...

AFL FUSE-LC9SMA-6 Singlemode LC/APC LC Angle Polish FUSEConnect fusion-splice connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished...

The AFL 90S+ fusion splicer is the latest core alignment splicer from AFL/Fujikura. It is designed to give you high quality splices and to stay in the field. The 90S kit solves common problems seen in the field today, from splicing poor quality legacy...

AFL FUSE-SC9SMU-6 Singlemode SC/UPC FUSEConnect fusion-spliced connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished ferrule...

AFL FUSE-SC9SMA-6 Singlemode SC/APC SC Angle Polish FUSEConnect fusion-splice connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished...

The AFL Fujikura 70S+ fusion splicer is the world’s fastest and most robust core alignment fusion splicer on the market. Incorporating the proven ruggedized features pioneered by Fujikura... resistance to rain, wind and dust, the 70S has added automated...

AFL FUSE-SC9M50L-6 OM3/OM4 Multimode SC/PC FUSEConnect fusion-spliced connectors utilizes a fusion splicer to terminate the connector in the field, addressing return loss concerns present in analog optical networks. The factory pre-polished ferrule...

The CT50 is an industry first cleaver ruggedized to withstand severe shock, including drops up to 30 inches. If needed, the CT50 is field serviceable with all precision components easily replaced in the field.The Fujikura CT50 features automated blade...

AFL's  CT08 cleaver is an extremely rugged, durable, and easy to use single fiber cleaver.  A thumbwheel on the bottom of the cleaver is utilized for blade rotation, and the blade position indicator enables quick and easy viewing. The top clamp...

AFL FM003092 LGX118 6 fiber LC connectors, Singlemode Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible wall mount or rack mount fiber optic patch panels and enclosures.6 LC Connectors Singlemode (3 Duplex LC)Shuttered connectors on front...

AFL's FM002712-BE XFM-2-U-B-0 Xpress Fiber Management (XFM) Patch Panel is a 2U, rack mountable interconnect point specifically designed to manage dense fiber applications. Based on the LGX® intermateability platform, this fiber enclosure...

AFL's FM002711-BE XFM-1-U-B-0 Xpress Fiber Management (XFM) Patch Panel is a 1U, rack mountable interconnect point specifically designed to manage dense fiber applications. Based on the LGX® intermateability platform, this fiber enclosure...

The AFL Fujikura S017091 41S+ is a fully ruggedized, two camera, active cladding alignment fusion splicer.Enabled by Warm Splice Imaging (WSI), the 41S+ can determine the alignment of the fibercores by observing the splice during the heating process...

AFL's FM001636 allows standard LGX118 (118mm) fiber adapter panels to fit Corning™ CCH and PCH enclosures (145mm).

AFL FP-05 Ribbon Fiber Protection Sleeves provide durable and lasting protection of 12 fiber ribbon splices in field installations. Sleeve length: 40mmCleave Length: 10mmSleeve Diameter after shrink: 4.5mmOuter Tube: PolyethyleneInner Tube (hot-melt...

AFL FM001185 LGX118 12 fiber LC connectors, 50µm Laser Optimized MultiMode OM3/OM4 Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible Wall mount or rack mount fiber optic patch panels and enclosures. 12 LC Connectors Aqua OM3/4 ...

AFL FM004252 LGX118 6 fiber LC connectors, OM4 Multimode Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible wall mount or rack mount fiber optic patch panels and enclosures. 6 LC Connectors Multimode OM3/OM4 (3 Duplex LC)Shuttered connectors...

AFL's FAST-ST-SM-6 FASTConnect Single-mode compatible ST fiber optic connector is a  factory pre-polished, field-installable fiber connector that completely eliminates the need for hand polishing in the field. Its proven mechanical splice technology...

AFL's FAST-ST-MM62.5-6 FASTConnect Multimode 62.5/125 µm, OM1 compatible ST fiber connector is a  factory pre-polished, field-installable connector that completely eliminates the need for hand polishing in the field. Proven mechanical splice...

AFL FM001184 LGX118 24 fiber LC connectors, 50µm Laser Optimized MultiMode OM3/OM4 Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible Wall mount or rack mount fiber optic patch panels and enclosures. 24 LC Connectors Aqua OM3/4 ...

AFL FM003465 LGX118 12 fiber LC connectors, Singlemode Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible wall mount or rack mount fiber optic patch panels and enclosures. 12 LC Connectors Singlemode (6 Duplex LC) Shuttered connectors on...

AFL's FAST-ST-MM50L-6 FASTConnect Multimode 50/125 µm, OM3/OM4 compatible ST fiber optic connector is a  factory pre-polished, field-installable connector that completely eliminates the need for hand polishing in the field. Proven mechanical...

The XFM-4U-B-0 Xpress Fiber Management (XFM) 4RU patch panel is a rack mountable interconnect point specifically designed to manage high density fiber applications. The XFM patch panel is fully compatible with AFL's XFM Optical Cassette, Poli-MOD® and...

AFL FM003112 LGX118 12 fiber LC connectors, OM4 Multimode Lightlink Adapter Plate. Fits AFL’s line of LGX118 compatible wall mount or rack mount fiber optic patch panels and enclosures. 12 LC Connectors Multimode OM3/OM4 (6 Duplex LC) Shuttered...

AFL's FAST-SC-SM-6 FASTConnect Single-mode compatible SC fiber optic connector is a factory pre-polished, field-installable fiber connector that completely eliminates the need for hand polishing in the field. Proven mechanical splice technology ensures...

FCC2 Enhanced Fiber Connector Cleaner is a residue-free, nonflammable solvent engineered to clean fiber connector end-faces and bare fiber before field terminating or fusion splicing. The 3-way dispenser is intended for easy one-handed use with fiber...

AFL's FAST-SC-MM62.5-6 FASTConnect Multimode 62.5/125 µm, OM1 compatible SC fiber optic connector is a  factory pre-polished, field-installable connector that completely eliminates the need for hand polishing in the field. Proven mechanical...

AFL's FAST-SC-MM50L-6 FASTConnect Multimode 50/125 µm, OM3/OM4 compatible SC fiber optic connector is a factory pre-polished, field-installable connector that completely eliminates the need for hand polishing in the field. Proven mechanical splice...

AFL's FC000070 1 x 6 Cable Router Kit is used to furcate the individual 12-fiber bundles within loose tube and eABF fiber cable. Each of the individual tubes can then be routed to patch panels, splice trays or further branched using the Fanout Kit.