Cables and wires

especially suitable for shielded and unshielded class EA systems cULus listed / DUXR.E178484 fully shielded Cat.6A patch cord AWG 27/7 two shielded RJ45 connectors, 1:1 assignment cable type: S/FTP 4x2xAWG 27/7 PIMF cable sheath: LSHF (LSOH), halogen...

fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1:1 assignment compliance with class E according to ISO/IEC 11801, DIN EN 50173-1 yellow cable, gray connector cable...

DCCS2 class EA Permanent Link consisting of two 6-port RJ45 subassemblies connected to a 24-pair installation cable AWG23/1 Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51,...

DCCS2 class EA Permanent Link consisting of two 6-port RJ45 subassemblies connected to a 24-pair installation cable AWG26/1 Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51,...

DCCS link consisting of a pre-assembled cable with DCCS housing mounted on one end. The second end is protected by a dismantle measure. The insertion aid allows safe installation even in narrow cable ducts. The cable end...

DCCS link consisting of a pre-assembled cable with DCCS housings connected at both ends. housing at the front with six LC duplex adapters each mini breakout cable with 12 fixed fibers, cable diameter 6.9 mm ...

DCCS link consisting of a pre-assembled cable with DCCS housings connected at both ends. housing at the front with six E2000 duplex couplings each mini breakout cable with 12 fixed fibers, cable diameter 6.9 mm ...

DCCS link consisting of a pre-assembled cable with DCCS housing mounted on one end. The second end is protected by a dismantle measure. The insertion aid allows safe installation even in narrow cable ducts. The cable end...

DCCS link consisting of a pre-assembled cable with DCCS housings connected at both ends. housing at the front with six LC duplex adapters each mini breakout cable with 12 fixed fibers, cable diameter 6.9 mm ...

DCCS holder with 6 MPO/MTP adapters front mounted MM adapters available for "aligned" (key up/key up, type B) and "opposed" (key up/key down, type A) assignment SM adapters available for "opposed" assignment (key...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 4 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 8 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

DCCS housing with 6 LC duplex adapters front mounted and one MTP adapter back mounted. Wire fanout with 12 wires integrated inside. easy assembly/disassembly in DCCS subrack (19 inch, 1 RU) Suitable for splitting or...

Cable fanout with 12 MM fibers, assembled with one MPO/MTP® connector and 6 LC-duplex connectors. Plastic divider as transition to fanout, consisting of individual cables with Ø 3 mm, length 0.7 m Female connector...

Cable fanout with 8 MM fibers, assembled with one MPO/MTP® connector and 4 LC-duplex connectors. Plastic divider as transition to fanout, consisting of individual cables with Ø 3 mm, length 0.7 m Female connector...

Cable fanout with 8 MM fibers, assembled with one MPO/MTP® connector and 4 E2000-duplex connectors. Plastic divider as transition to fanout, consisting of individual cables with Ø 3 mm, length 0.7 m Female...

Cable fanout with 12 MM fibers, assembled with one MPO/MTP® connector and 6 E2000-duplex connectors. Plastic divider as transition to fanout, consisting of individual cables with Ø 3 mm, length 0.7 m Female...

Cable fanout with 12 SM fibers, assembled with one MPO/MTP® connector and 6 LC-APC duplex connectors. Plastic divider as transition to fanout, consisting of individual cables with Ø 2 mm, length 0.7 m Female...

Trunk cable with 12 SM fibres, assembled on both sides with one MPO/MTP® connector each. Available in the assignment variant polarity A or B. A insertion aid incl. fastening set is optionally available on one side. ...

Trunk cable with 72 SM fibers, assembled on both sides with 6 MPO/MTP® connectors each. Fanout consisting of individual cables with Ø 2.0 mm, length 0.4 m or cascaded when using a insertion aid. Available in the...

Trunk cable with 48 SM fibers, assembled on both sides with 4 MPO/MTP® connectors each. Robust cable divider made of aluminum as a transition to the fanout. can be screwed or latched for fastening ...

Sturdy corrugated tube for pulling in pre-assembled cables. for mounting on fixing sets or cable dividers Suitable for: Universal cable up to 12 fibres Outdoor cables up to 12 fibres ...

Sturdy corrugated tube for pulling in pre-assembled cables. for mounting on fixing sets or cable dividers Suitable for: Universal cable up to 24 fibres Outdoor cables up to 24 fibres ...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OM4 fibre stainless steel divider for quick mounting in...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OM4 fibre stainless steel divider for quick mounting in...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OS2 fibre stainless steel divider for quick mounting in...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OS2 fibre stainless steel divider for quick mounting in...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OS2 fibre stainless steel divider for quick mounting in...

pre-assembled cable with universal cable for quick installation and laying of fibre optics assembled on both sides with LC plugs bend insensitive OS2 fibre stainless steel divider for quick mounting in...

Pre-assembled installation cables (VIK) with universal cable and with LC simplex connectors assembled on both sides. Fiber optic loose tube cable U-DQ(ZN)BH, suitable for indoor and outdoor applications. ...

Pre-assembled installation cables (VIK) with universal cable and with LC simplex connectors assembled on both sides. Fiber optic loose tube cable U-DQ(ZN)BH, suitable for indoor and outdoor applications. ...