Accessories

The USB to RS485 converter allows to connect devices with serial UART interface quickly and easily to USB. The transparent USB plug includes LEDs to view the Tx and Rx traffic on the cable. The other end of the cable consists of bare, tinned wires...

Leakage sensors are connected to level sensors, such as ENW-E12 (P/N 110308xx), to detect conductive liquids, for example, when a pipe bursts. If an electrically conductive liquid (e.g. water) comes between the two electrodes, an electrical...

Leakage sensors are connected to level sensors, such as ENW-E12 (P/N 110308xx), to detect conductive liquids, for example, when a pipe bursts. If an electrically conductive liquid (e.g. water) comes between the two electrodes, an electrical...

Terminal block to feed bus and power supply of I/O components. Screw-type terminal block, solderable, 4-pole Grid dimension 3.5 mm, connection direction 90° Wire protection Black ...

Jumper plug for quickly connecting I/O components without tools. The jumper plug connects bus and power supply of I/O modules mounted next to each other. pluggable, 4-pole Grid dimension 3.5 mm Black ...

The NG4-F power supply supplies a regulated direct voltage of 24 V DC / 16 W for supplying power to the respective devices of the product family of I/O components. The secondary voltage can only be tapped at the right side of the device front at a...

The NG4 HS power supply supplies a regulated direct voltage of 24 V DC / 16 W for supplying power to the respective devices of the product family of I/O components. The secondary voltage can only be tapped at the right side of the device front at a...

The HUB DC is used as ballast to operate I/O modules of the C|Logline LON, Modbus and BACnet range to rectify and smooth 24 V AC (alternating voltage). It supplies at the output a smoothed direct voltage of about 33 V DC (with 24 V AC at the input). To...

Switch-on module for bus connection, supply voltage and adjustable bus termination. The switch-on module was developed as wiring help for supplying the supply voltage and a two-wire bus to the LON bus modules. The supply voltage and the two-wire bus are...