Modular wall outlet for the construction of a passive network infrastructure with the highest quality requirements. The junction box is suitable for connecting telephones up to 10 Gbit networks and power supply with PoE with up to 90W. The very robust, nickel-plated zinc die-cast module, which consists of only two parts, can be connected by the installer very easily and in a very short time without any special tools. In addition to the permanent quality control during production, independent test laboratories confirm the very good quality of the individual modules with various certificates. The wall outlets are supplied in retail-friendly, separable cardboard packaging with 10 pieces each.
- variants, mounting type: AP, UP, UPk, UP0
- variants, number of ports: 1, 2, 3
Resources
Specifications
General Data | Fields of application: | - structured building cabling
- office areas
- Distributed building services
|
|---|
| Mechanical measurement according to MICE: | M1 |
|---|
| Ingress measurement according to MICE: | I1 |
|---|
| Climatic measurement according to MICE: | C1 |
|---|
| Electromagnetic measurement according to MICE: | E2 |
|---|
| Design: | wall outlet |
|---|
| Shielding: | shielded |
|---|
| Transmission technology: | Copper |
|---|
| Wiring: | T568A |
|---|
| Modularity: | yes |
|---|
Transmission characteristics | Category (ISO): | 6A |
|---|
| Class (ISO/IEC): | EA |
|---|
| Category (TIA): | 6A |
|---|
| Remote Powering: | yes |
|---|
| PoE: | IEEE 802.3af |
|---|
| PoE plus: | IEEE 802.3at |
|---|
| UPoE: | yes |
|---|
| 4PPoE: | IEEE 802.3bt |
|---|
| HDBaseT: | yes |
|---|
| SAT-IP: | yes |
|---|
| AVoverIP: | yes |
|---|
| Transmission rate up to 100 MBit (Fast Ethernet): | IEEE 802.3bw |
|---|
| Transmission rate up to 1 GBit (Fast Ethernet): | IEEE 902.3ab |
|---|
| Transmission rate up to 10 GBit: | IEEE 802.3an |
|---|
Connections/interfaces | Connector technology interface 1: | IDC-connection |
|---|
| Connector technology interface 2: | RJ45-jack |
|---|
| Number of ports interface 2: | 1, 2, 3 |
|---|
| Conductor cross section solid wire [AWG] min-max: | AWG 26/1 - AWG 22/1 |
|---|
| Conductor cross section stranded wire [AWG] min-max: | AWG 26/7 - AWG 22/7 |
|---|
| Cable sheath diameter [mm min.]: | 5.5 mm |
|---|
| Cable sheath diameter [mm max.]: | 10 |
|---|
| Cable sheath diameter [inch min.]: | 0.197 in. |
|---|
| Cable sheath diameter [inch max.]: | 0,394 |
|---|
| Shield connection: | flexible contact spring |
|---|
| Ground connection: | Via M4 thread (screw not included!) |
|---|
Electrical/optical characteristics | Current carrying capacity: | max. 1 A at 60 °C |
|---|
| Rated voltage: | max. 60 V DC |
|---|
| Rated voltage UL: | max. 56.5 V DC |
|---|
| Contact resistance: | max. 20 mOhm |
|---|
| Through resistance: | max. 200 mOhm |
|---|
| Insulation resistance: | min. 500 MOhm |
|---|
| Dielectric strength conductor-conductor (secondary) [V DC]: | max. 1000 V DC |
|---|
| Dielectric strength conductor-conductor, peak value (secondary) [V AC]: | max. 1.000 V AC |
|---|
| Dielectric strength conductor-shield [V DC]: | max. 1500 V DC |
|---|
| Dielectric strength conductor-shield, peak value [V AC]: | max. 1500 V AC |
|---|
Mechanical data | Cut-out: | module |
|---|
| Insertion and withdrawal force: | max. 30 N |
|---|
| Life - Number of mating cycles: | min. 750 |
|---|
Position/mounting of latch
standard installation position: | top |
|---|
| strain relief: | cable tie |
|---|
Materials and material properties | Material - Supporting frame: | GD-Zn (zinc die-cast) |
|---|
| Material - Module support: | GD-Zn (zinc die-cast) |
|---|
| Material - Contact: | Spring steel |
|---|
| Material - Contact finish: | Ni + Au (nickel-gold) |
|---|
| Material - Contact carriers: | PA 6.6 |
|---|
| Material - Insulation displacement contacts: | CuSn (tin bronze) |
|---|
| Material - Finish of insulation displacement contacts: | Sn (tin) |
|---|
| Material - Shield: | GD-Zn (zinc die-cast) |
|---|
| Halogen free: | yes |
|---|
| RoHS: | compliant |
|---|
Environmental conditions | Temperature - Storage °C [min.]: | -40 °C |
|---|
| Temperature - Storage °C [max.]: | 70 °C |
|---|
| Temperature - Operating °C [min.]: | -40 °C |
|---|
| Temperature - Operating °C [max.]: | 70 °C |
|---|
| IP class: | IP20 |
|---|
Certifications | GHMT Type Approval: | Component |
|---|
