Description
- Cable fanout with 8 MM fibers, assembled with one MPO/MTP® connector and 4 E2000-duplex connectors.
- Plastic divider as transition to fanout, consisting of individual cables with Ø 3 mm, length 0.7 m
- Female connector (without pins).
- Available in the assignment variant polarity A or B.
- A insertion aid incl. fastening set is optionally available on the MTP side.
- Suitable for transmissions of e.g. 100 Gbit/s (depending on transceiver technology).
- Cable with aramid yarn, suitable for indoor applications.
- Diameter available in Ø 3.0 mm
- UV stabilized, flame retardant and halogen free.
- Fibre type: Bend-resistant multimode fibre, G50/125µm, OM4 (IEC 11801), IEC 60793-2-10 A1a.3, ITU-T G.651.1.
- 100 % tested for insertion loss, return loss and end face geometry
- all fanouts with serial number, barcode and measurement protocol
- all available variants can be created with the MTP® configurator
- MTP® is a registered trademark of US Conec Ltd., USA
Resources
| OpDAT cable fanout 1xMTP-F/4xE2000-D OM4 | 152SC8FMOXYYZZ | View DataSheet |
|---|
