The BACnet MS/TP module in IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. In this case it is necessary to protect the relay contacts by appropriate load-dependent measures. The inputs can be used as contact or voltage inputs. The inputs and outputs can be switched and scanned by means of standard objects via a BACnet client. Module address and bit rate are set with two rotary switches.
Resources
Specifications
General Data | Protocol | BACnet MS/TP |
| Addressing range | 00 to F9 |
| Bus interface | RS485 (two-wire bus) |
| Transmission rate | 9600 to 115200 bits/s |
| Operating voltage range | 230 V +/- 10 % |
| Current consumption | 200 mA (AC) / 12 mA (DC) |
| Relative duty cycle | 100 % |
| Inputs | 4 x digital (contact) |
| Output / contacts | 2 changeover contacts (DPST) |
| Output / switching voltage | 250 V AC |
| Output / continuous current (UL) | 8 A / output |
| Output / continuous current (VDE) | 10 A / output |
| Display | Green, red and yellow LED |
| Dimensions (W x H x D) | 159 x 41.5 x 120 mm |
| Weight | 350 g |
| Operating temperature range | -5 °C to 55 °C |
| Storage temperature range | -20 °C to 70 °C |
| Ingress protection for housing / terminal blocks | IP65 / IP20 |
