Coupling devices are used to secure electrical isolation between logic and load.
- Connection with spring-clamp terminal
- Additional terminals for jumper
- Test contacts for each terminal
- Safe separation
- with manual control level and automatic-checkback function
- 3 LED-Indicator, status displays
Resources
Specifications
General Data | Operating voltage | 24 V AC/DC |
| Current consumption | approx. 13 mA |
| Outputs / contact | 1 changeover contact (SPDT) |
| Output / contact material | AgSnO2 |
| Output / switching voltage | 250 V AC/DC |
| Output / continuous current | 8 A |
| Output / switching frequency | 360 cycles/h |
| Response time | approx. 10 ms |
| Release time | approx. 5 ms |
| Mechanical endurance | 1 x 107 |
| Electrical endurance | 1 x 105 |
| Solid wire cross-section | 0.08 mm22 |
| Stranded wire without end sleeve | 0.08 mm22 |
| Stranded wire with end sleeve | 0.08 mm22 |
| Display | Green, red and yellow LED |
| Dimensions (W x H x D) | 11.2 x 87.5 x 60 mm |
| Weight | 43 g |
| Operating temperature range | -20 °C to +55 °C |
| Storage temperature range | -25 °C to +70 °C |
| Ingress protection of the housing | IP20 |
