Description
Features
- Please see our NEW & improved versions (easy wire secondary series).
- Designed for push-pull tube output circuits.
- Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
- Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum.
- Insulated flexible leads 8" min.
- Manufactured with plastic coil forms for coil support and insulation.
- Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
- Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications (see hook-up diagrams below).
- For the "ultimate" in Push-Pull output see our line of epoxy potted output transformers.
1645 Only
- Secondary Connections (Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications)
- To hook up 4/8/16 ohm secondary loads - see schematic (do not use the white wire).
- To hook up secondary to 70V loads, jumper Blk/Yel wire to Grn wire. Connect load to Blk and White wires.
Specifications
| Audio Watts (RMS) | 60 |
|---|---|
| Impedance (Ohms) | 6,600 ct |
| Maximum D.C. Per Side | 200 ma. |
| Secondary Impedance (Ohms) | 4-8-16 |
| Operation | Push-Pull (2 Tubes) |
| Suggested Tube Types | 6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88 |
| Drawing Sheet | Download Drawing Sheet |
