Note: All Binder product sales are final. Non-cancelable, non-returnable (NCNR).
These circular connectors according to DIN EN 61076-2-106, which are available as straight and angled cable versions as well as flange versions, comply with protection class IP67. The connectors are offered with 2 to 24 contacts with dip solder, crimp, screw clamp, solder and stranded wires and are also available with a moulded cable. Some versions are shieldable and users can expect more than 500 mating cycles. The 8-pole DIN versions are AWG compliant.
General Features | Part no. | 99 5171 760 08 |
| Connector design | Male cable connector |
| Version | Connector pin straight |
| Connector locking system | screw |
| Termination | crimping |
| Degree of protection | IP67 |
| Cross-sectional area | 0.14-0.75 mm² / AWG 26-20 |
| Cable outlet | 4.1-7.8 mm |
| Temperature range from/to | -40 °C / 100 °C |
| Mechanical operation | > 500 Mating cycles |
| Additional information | Short version |
| Weight (g) | 0.00 |
| Customs tariff number | 85369010 |

Electrical Parameters | Rated voltage | 32 V |
| Rated impulse voltage | 500 V |
| Rated current (40 °C) | 5.0 A |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | III |
| EMC compliance | shieldable |
| Shield connection | cable clamp |
Material | Housing material | CuZn (Brass nickel plated) |
| Contact body material | PBT |
| Contact plating | depending on crimp contact (accessory) |
| Locking material | CuZn (brass) |
| REACH SVHC | CAS 7439-92-1 (Lead) |
| SCIP number | d407c1e4-28c5-4349-a0e2-751c6ca9152c |