With a push-pull locking system and protection of up to IP67, the 430 series comes in both cable connector and panel mount versions both of which are shieldable if required. Available with 3 to 8 contacts rated between 1A and 4A, termination is solder with wire sizes from 0.14mm² to 0.25mm². The diameter of the cable connector is 14.5mm while the panel mount version measures 17.5mm.
General Features Part no. | 99 4905 00 03 |
---|
Connector design | Male cable connector |
---|
Version | Connector pin straight |
---|
Connector locking system | Push-Pull |
---|
Termination | solder |
---|
Degree of protection | IP67 |
---|
Cross-sectional area | max. 0.25 mm² / AWG 24 |
---|
Cable outlet | 3.5-5.0 mm |
---|
Temperature range from/to | -40 °C / 85 °C |
---|
Mechanical operation | > 500 Mating cycles |
---|
Weight (g) | 8.72 |
---|
Customs tariff number | 85369010 |
---|
Electrical Parameters Rated voltage | 125 V |
---|
Rated impulse voltage | 1500 V |
---|
Rated current (40 °C) | 4.0 A |
---|
Pollution degree | 2 |
---|
Overvoltage category | I |
---|
Insulating material group | II |
---|
EMC compliance | shieldable |
---|
Shield connection | Shield clamping |
---|
Material Housing material | PA |
---|
Contact body material | PUR/PA |
---|
Contact material | CuZn (brass) |
---|
Contact plating | Au (gold) |
---|
Locking material | CuZn (brass) |
---|
REACH SVHC | CAS 7439-92-1 (Lead)
|
---|
SCIP number | eaaf9cc5-2c07-4da4-8e8c-75dccf1b9846 |
---|