RD30 power connectors of the 694 series with screw clamp and solder termination are available as straight and angled cable connectors and 44.45 x 44.5 mm square flange versions. The connectors are available with 5 (4+PE), 13 (12+PE) and 24 contacts with a rated current of 3 A (125 V), 6 A (250 V) and 20 A (400 V), depending on the number of contacts. They conform to IP65 with an operating temperature range from -40 °C to +100 °C. Connection cross-sections from AWG 14 to AWG 24 are possible. Many connectors are VDE and SEV approved.
General Features Part no. | 99 0710 03 05 |
---|
Connector design | Female cable connector |
---|
Version | Connector socket straight |
---|
Connector locking system | screw |
---|
Termination | screw clamp |
---|
Degree of protection | IP65 |
---|
Cross-sectional area | 2.50 mm² / AWG 14 |
---|
Cable outlet | 14.0-18.0 mm |
---|
Temperature range from/to | -40 °C / 100 °C |
---|
Mechanical operation | > 500 Mating cycles |
---|
Weight (g) | 86.13 |
---|
Customs tariff number | 85369010 |
---|
Electrical Parameters Rated voltage | 400 V |
---|
Rated impulse voltage | 6000 V |
---|
Rated current (40 °C) | 20.0 A |
---|
Insulation resistance | ? 10¹? ? |
---|
Pollution degree | 3 |
---|
Overvoltage category | III |
---|
Insulating material group | III |
---|
EMC compliance | unshielded |
---|
Material Housing material | PA |
---|
Contact body material | PA (UL94 HB) |
---|
Contact material | CuSn (bronze) |
---|
Contact plating | Ag (silver) |
---|
REACH SVHC | CAS 7439-92-1 (Lead)
|
---|
SCIP number | e52182fe-f5ea-4732-adac-09e8b032a8be |
---|
Declarations of conformity Low Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
---|