With a push-pull locking system and protection of up to IP67, the 430 series comes in both cable connector and panel mount versions both of which are shieldable if required. Available with 3 to 8 contacts rated between 1A and 4A, termination is solder with wire sizes from 0.14mm² to 0.25mm². The diameter of the cable connector is 14.5mm while the panel mount version measures 17.5mm.
General Features Part no. | 09 4916 081 05 |
---|
Connector design | Female panel mount connector |
---|
Version | Connector socket straight |
---|
Connector locking system | Push-Pull |
---|
Termination | solder |
---|
Degree of protection | IP67 |
---|
Cross-sectional area | 0.25 mm² / AWG 24 |
---|
Temperature range from/to | -40 °C / 85 °C |
---|
Mechanical operation | > 500 Mating cycles |
---|
Weight (g) | 10.23 |
---|
Customs tariff number | 85369010 |
---|
Electrical Parameters Rated voltage | 125 V |
---|
Rated impulse voltage | 1500 V |
---|
Rated current (40 °C) | 3,0 A |
---|
Pollution degree | 2 |
---|
Overvoltage category | I |
---|
Insulating material group | II |
---|
EMC compliance | shieldable |
---|
Shield connection | Shield on the housing |
---|
Material Contact body material | PUR/PA |
---|
Contact material | CuSn (bronze) |
---|
Contact plating | Au (gold) |
---|
REACH SVHC | CAS 7439-92-1 (Lead)
|
---|
SCIP number | 3f5b3347-18bd-4ac8-9407-fe5c9b57317a |
---|