Description
Our 12 port RJ45 to 110 Category 6 patch panel provides an wiring organization point for 12 permanent cabling runs between wiring closet and user outlets. RJ45 jacks on the front commonly connect a switch or router to the panel via patch cables while the corresponding 110 clips on the back are terminated with the permanent cabling runs. Color coded 110 clips make wire termination fast and simple and feature the appropriate color code for either 568A or 568B terminations. The panels come with a lite duty 110 tool for terminating wire and 110 stuffer caps to protect the finished terminations. Category 6 is a future forward networking standard, providing a backbone for transmission speeds up to 1000 Base-T and is backwards compatible with both 10 Base-T and 100 Base-T. Category 6 is superior to Cat5E in bandwidth, signal to noise ratio and lower attenuation or signal loss at high frequencies. Product dimensions are: 19″w x 1.75″h (1u) x 2″d.
CATEGORY 6
Category 6 cable, commonly referred to as Cat 6, is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. The cable provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-T, and 1000BASE-T for distances of up to 100 meters, and 10GBASE-T for distances up to 55 meters.
CABLING STANDARDS
Network cabling standards are used internationally and are published by ISO/IEC, CENELEC and the Telecommunications Industry Association (TIA). Since 1995, solid-conductor UTP cables for backbone cabling is required to be no thicker than 22 AWG and no thinner than 24 AWG, or 26 AWG for shorter-distance cabling.
WARNING: This product contains brass which can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and developmental issues. For more information, go to www.P65Warnings.ca.gov
Specifications
| Weight | 1.7 lbs |
|---|---|
| Dimensions | 2.8 × 3.6 × 20.2 in |
