Description
OCC, DX, Distribution Series, 48-Strand, 900um Tight Buffered, Indoor/Outdoor, OFNR Rated, OM3, 50/125, Multimode, Aqua Jacket
Reference Previous Part Number: DX48-105D-ALT/900-OFNR
Note: This item may require 24 hours for cut and prep before shipping.
DX-Series Distribution – Riser Rated Cables
Installation zone RECOMMENDATION
- Indoor/Outdoor tight-buffered design allows cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types
- Ideal configuration for a single termination point requiring multiple fibers
- 900μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices, because connectors terminate directly to the fiber
- No need to splice outdoor cable to indoor cable at building entrance
- High crush resistance may eliminate the need for innerduct
Applications - Indoor/Outdoor tight-bound tight-buffered design allows cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types
- Ideal configuration for a single termination point requiring multiple fibers
COST SAVINGS - 900 µm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
- No need to splice outdoor cable to indoor cable at building entrance
- High crush resistance may eliminate the need for innerduct
Features - High performance components and construction
- Cable materials are indoor/outdoor - UL-listed OFNR and UV, water and fungus resistant
- UL Listed in accordance with NEC section 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
- Wide operating temperature range of -40°C to +85°C
- Helically stranded core for greater flexibility and mechanical protection of the optical fibers
- High strength-to-weight ratio
- 2-144 fiber configuration is smaller and lighter than comparable sub-grouped cables made by others: ideal for installation in areas with limited space or tight bends
- Can be armored for additional protection in direct burial and aerial installations
- Interlocking armor can be applied to cables as an alternative to conduit installation
Characteristics
- 900 µm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
- No need to splice outdoor cable to indoor cable at building entrance
- High crush resistance may eliminate the need for innerduct
Features - High performance components and construction
- Cable materials are indoor/outdoor - UL-listed OFNR and UV, water and fungus resistant
- UL Listed in accordance with NEC section 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
- Wide operating temperature range of -40°C to +85°C
- Helically stranded core for greater flexibility and mechanical protection of the optical fibers
- High strength-to-weight ratio
- 2-144 fiber configuration is smaller and lighter than comparable sub-grouped cables made by others: ideal for installation in areas with limited space or tight bends
- Can be armored for additional protection in direct burial and aerial installations
- Interlocking armor can be applied to cables as an alternative to conduit installation
Characteristics
| Characteristic | Riser |
|---|---|
| Operating Temp | -40°C to +85°C |
| Storage Temp | -55°C to +85°C |
| Install Temp | -10°C to +60°C |
| Flame Retardancy | UL listed type OFNR (UL 1666) for all fiber counts *FT4 (CSA C22.2 No. 232) for 2-24 fiber counts only |
| Crush Resist | 1800 N/cm |
| Impact Resist | 1500 impacts |
| Flex Resist | 2000 cycles |
| Jacket Type | D |
Standards
Optical Cable Corporation's Indoor/Outdoor tight-buffered fiber optic cables meet the functional requirements of the following standards:
- UL 1651
- UL 1666
- GR-409-CORE
- ICEA-S-104-696
- ICEA-S-83-596
- TIA-568
- TIA-598
- UL-listed type OFNR in accordance with NEC sections 770-179 (B) and 770-154 (B) for use in vertical runs in building riser shafts or from floor to floor. Meets or exceeds requirements for intra-building fiber optic cables as outlined in GR-409-CORE.
Specifications Riser
| Tensile Load | Minimum Bend Radius | |||||||
|---|---|---|---|---|---|---|---|---|
| Fiber Count | Part Number | Diameter mm (in) | Weight kg/km (lbs/1,000ft) | Installation N (lbs) | Operation N (lbs) | Installation cm (in) | Longer Term cm (in) | |
| 2 | DX002D***9*R | 4.8 (0.19) | 22.0 (14.0) | 660 (150) | 180 (40) | 7.3 (2.9) | 4.8 (1.9) | |
| 4 | DX004D***9*R | 5.1 (0.20) | 24.0 (16.0) | 1,400 (310) | 450 (100) | 7.7 (3.0) | 5.1 (2.0) | |
| 6 | DX006D***9*R | 5.7 (0.22) | 31.0 (21.0) | 1,400 (310) | 450 (100) | 8.6 (3.4) | 5.7 (2.2) | |
| 8 | DX008D***9*R | 6.0 (0.24) | 33.0 (22.0) | 1,600 (360) | 525 (120) | 9.0 (3.5) | 6.0 (2.4) | |
| 10 | DX010D***9*R | 6.5 (0.26) | 42.0 (28.0) | 1,800 (400) | 600 (135) | 9.8 (3.9) | 6.5 (2.6) | |
| 12 | DX012D***9*R | 6.5 (0.26) | 38.0 (25.0) | 2,700 (600) | 600 (135) | 9.8 (3.9) | 6.5 (2.6) | |
| 18 | DX018D***9*R | 7.3 (0.29) | 47.0 (31.0) | 2,700 (600) | 700 (160) | 11.0 (4.3) | 7.2 (2.8) | |
| 24 | DX024D***9*R | 8.9 (0.35) | 66.0 (44.0) | 3,000 (670) | 1,000 (220) | 13.4 (5.3) | 8.9 (3.5) | |
| 30 | DX030D***9*R | 9.1 (0.36) | 75.0 (50.0) | 3,000 (670) | 1,000 (220) | 13.7 (5.4) | 9.1 (3.6) | |
| 36 | DX036D***9*R | 9.1 (0.36) | 73.0 (49.0) | 3,000 (670) | 1,000 (220) | 13.7 (5.4) | 9.1 (3.6) | |
| 48 | DX048DALT9QR | 10.5 (0.41) | 93.0 (63.0) | 4,200 (940) | 1,400 (310) | 17.4 (6.9) | 11.6 (4.6) | |
| 60 | DX060D***9*R | 12.3 (0.48) | 135.0 (91.0) | 4,800 (1,080) | 1,600 (360) | 18.5 (7.3) | 12.3 (4.8) | |
| 72 | DX072D***9*R | 14.0 (0.55) | 177.0 (119.0) | 5,400 (1,210) | 1,800 (400) | 21.0 (8.3) | 14.0 (5.5) | |
| 84 | DX084D***9*R | 14.4 (0.57) | 190.0 (128.0) | 6,000 (1,350) | 2,000 (450) | 21.6 (8.5) | 14.4 (5.7) | |
| 96 | DX096D***9*R | 16.0 (0.63) | 225.0 (151.0) | 6,000 (1,350) | 2,000 (450) | 24.1 (9.5) | 16.0 (6.3) | |
| 108 | DX108D***9*R | 16.8 (0.66) | 246.0 (165.0) | 6,000 (1,350) | 2,000 (450) | 25.3 (10.0) | 16.8 (6.6) | |
| 120 | DX120D***9*R | 17.9 (0.70) | 271.0 (182.0) | 6,000 (1,350) | 2,000 (450) | 26.8 (10.6) | 17.9 (7.0) | |
| 132 | DX132D***9*R | 17.8 (0.70) | 291.0 (195.0) | 6,000 (1,350) | 2,000 (450) | 26.8 (10.6) | 17.8 (7.0) | |
| 144 | DX144D***9*R | 20.3 (0.80) | 339.0 (228.0) | 6,000 (1,350) | 2,000 (450) | 30.5 (12.0) | 20.3 (8.0) | |
