Series 220 solenoid valve connectors have a low housing and comply with design B DIN EN 175301-803. In addition to the DIN standard, the industrial standard is also offered. These connectors with 2+PE contacts are available pre-assembled and PUR moulded (IP67) or as self-terminating variants with screw terminal connections. The series is complemented by device connectors, as well as flat and profile seals to increase the degree of protection. If an optical status display is also required, the available LED versions can be used.
General Features Part no. | 32 5335 300 000 Alternative part no.: 32 1313 300 000 |
---|
Notice | Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the Contact Customer Service form on the right. More |
---|
Connector design | Female solenoid valve connector |
---|
Cable length | 3 m |
---|
Version | Connector socket angled |
---|
Connector locking system | Central bolt |
---|
Termination | moulded on the cable |
---|
Degree of protection | IP67 |
---|
Cross-sectional area | 0.75 mm² / AWG 18 |
---|
Temperature range from/to | -25 °C / 80 °C |
---|
Mechanical operation | > 50 Mating cycles |
---|
Weight (g) | 195.00 |
---|
Customs tariff number | 85444290 |
---|
Electrical Parameters Rated voltage | 230 V |
---|
Rated impulse voltage | 4000 V |
---|
Rated current (40 °C) | 10.0 A |
---|
Insulation resistance | ? 10¹? ? |
---|
Pollution degree | 3 |
---|
Overvoltage category | III |
---|
Insulating material group | I |
---|
EMC compliance | unshielded |
---|
Material Housing material | PBT |
---|
Contact body material | PA |
---|
Contact material | CuSn (bronze) |
---|
Contact plating | Sn (tin) |
---|
REACH SVHC | CAS 7439-92-1 (Lead)
|
---|
SCIP number | SCIP-number not available |
---|
Cable DataStructure of the cable |
Sheath material | PUR |
---|
Single-lead structure | 3 x 0.75 mm |
---|
Cable color | black |
---|