Shrink Tubing

DBST250Description: DAFLEX ST250 cold shrinking Stretch-N-Seal tape requires no heat to provide a secure covering where the size and or shape of an object does not permit the use of shrinkable tubing. Simply remove 2" to 3" of tape from the roll, remove...

DBSM450Description: DAFLON SM450 is a dual wall shrink and melt PTFE tubing which gives a tight, moisture-proof seal. It is made from two types of PTFE. The outer wall is TFE and the inner lining is FEP. When heated to 400°F, the FEP melts, and...

DBSM321SM321 Specification Sheet PDF3:1 Shrink RatioSemi-Rigid Heavy WallDual-Wall Adhesive-LinedFlame Retardant Polyolefin TubingApplicationsDaburn DAFLEX SM321 is a large size, heavier wall adhesive lined, large ratio, heat shrinkable tubing with a...

DBSM320SM320 Specification Sheet PDF3:1 Shrink RatioSemi-Rigid Medium WallDual-Wall Adhesive-LinedFlame Retardant Polyolefin TubingApplicationsDaburn DAFLEX SM320 is a large size, medium wall adhesive lined, large ratio, heat shrinkable tubing with a...

DBSM284SM284 Specification Sheet PDF4:1 Shrink RatioSemi-RigidDual-WallPolyolefin TubingExtended Temperature RangeDescription:Daburn SM284 is a fully flame retardant, semi-rigid, high shrink ratio, adhesive lined heat shrinkable polyolefin tubing. Both...

DBSM270Description: Daburn's dual wall polyolefin heat shrinkable tubing is designed to provide a tight moisture proof encapsulating seal. When 120°C/248°F is applied, the inner wall melts and flows, as the outer wall shrinks; forcing the melting wall to...

#SH825 Specification Sheet PDF Technical Data: 2:1 maximum shrink ratio Minimum Recommended Shrink Temperature: 100°C (212°F) Tensile Strength: 3,000 psi Durometer: 85 Durometer Shore A Storage: Heat sensitive —...

DBSH740#SH740 Specification Sheet PDFOrder sizes 0 to 9 from this page.  For sizes 10 to 17 see this link ====>

DBSH721   2:1 Shrink Ratio, Fluoroelastomer Tubing, Flexible, High Temperature, Chemical and Abrasion Resistant   #SH721 Specification Sheet PDF Description    Daburn SH721 is a flexible, fluoroelastomer...

DBSH622 #SH622 Specification Sheet PDFDescription: Made of modified extruded PTFE (polytetraflourethylene), #SH622 tubing will shrink when heated to 621°F (327°C). Suitable where hi-temp protection is required. Color: Natural/Clear...

DBSH621 Made of modified extruded PTFE (polytetraflourethylene) it will shrink when heated to 621°F (327°C). Suitable where hi-temp protection is required. Color: Natural/Clear.Will not support combustion, dielectric strength (20 Mil Wall) 850...

DBSH620 The #SH620 series of Daflon ultra-thin wall heat shrink tubing offers a range of sizes with ultra-thin walls and a range of shrink ratios. It shrinks at 327°C/621° F.The series is ideal for medical applications where ultra-thin walls, IDs,...

DBSH421 DAFLON SH421 Shrinkable PTFE Tubing recovers to approximately 25% of its expanded size when heated to the gel point (621°F). Thus it is now possible to use shrinkable PTFE tubing, with its excellent chemical and physical properties,...

DBSH400 Made of modified extruded FEP, the SH400 series will shrink over inserted objects upon exposure to moderate heat. Heretofore, many joints, parts components, devices could not be protected because of high temperature required for shrinkage.FEP,...

DBSH380SH380 Specification Sheet PDF2:1 Shrink RatioExtended Temperature RangeDescription:Daburn SH380 is flexible elastomer polyolefin heat-shrink tubing, resistant to aviation and diesel fuels, hydraulic fluids, and lubrication oils. It reliably...

DBSH350 DAFLEX KYNAR, a semi-rigid shrinkable polyvinylidene (PVDF) fluoride tubing, is free from flaws, pin holes, seams, cracks or inclusions. It is a tough, high temperature, thin wall tubing with high cut through and abrasion resistance. It shrinks...

DBSH321 DAFLEX SH321 Heat Shrinkable Polyolefin Tubing recovers to 33% of its supplied size when fully recovered. It will shrink, with the application of only 90°C (194°F); it is rated for continuous operation from -55°C to +135°C and will withstand up...

DBSH290 This semi-rigid tubing series is designed for maximum mechanical strength at stress or points of connection. It is strong, abrasion resistant and is supplied in expanded sizes. It insulates, jackets, splices, encapsulates, weather-proofs...

DBSH277 Description: DAFLEX SH277 shrinkable irradiated polyolefin tubing recovers to 25% of its supplied size when full recovery is permitted. Material will shrink with the application of 120°C (250°F), is rated for continuous operation from -55°C to...

DBSH275Description: When exposed to heat 194°F/90°C the tubing shrinks 50% in diameter, with 5% longitudinal contraction. Controlled shrinkage to exact requirement takes place. This series is designed for maximum mechanical strength at stress or points...

DBSH267Description: This heavy wall PVC tubing shrinks 50% in diameter when heated to 95°C / 200°F for one minute or less, and has the same characteristics as the DAFLEX

DBSH265 This non-irradiated heat shrinkable PVC tubing is flexible and shrinks 50% when heated to 100°C (212°F) for one minute or less, with approximately 15% longitudinal contraction**.There is controlled shrinkage on the application of heat for one...

DBSH162Description: This Neoprene tubing (#SH162) meets or exceeds MIL-I-23053/1 Class 1 & 2. It shrinks down 50% of its supplied inside diameter, upon exposure to heat of 150°C/302°F - will remain elastomeric - with no cracks. Longitudinal shrinkage...

DBDCAP Daflex cross linked polyolefin end caps are ideal for sealing cable ends, splices, pipes or similar objects against the environment. They insulate, resist weathering, moisture, common fluids and solvents.These end caps can shrink to 1/3 their...