Description
DBDCAP
Daflex cross linked polyolefin end caps are ideal for sealing cable ends, splices, pipes or similar objects against the environment. They insulate, resist weathering, moisture, common fluids and solvents.
These end caps can shrink to 1/3 their supplied dimensions, with the application of 120°C. Guide-lines on the end cap body indicate when sufficient heat has been applied to the cap's surface. They will fully recover to the size of their closed end, as supplied. DAFLEX end caps are available with (standard item) or without an adhesive lining. The molded end seal will withstand up to 100 psi, and indicates the fully recovered dimension.
Daflex No. | Nominal Length | Expanded | Recovered | O.D. Range | ||||||
---|---|---|---|---|---|---|---|---|---|---|
Nom. I.D. Min. | Nom. I.D. Max. | Total Wall Nom. | ||||||||
Exp. IN. | Rec. IN. | IN. | MM | IN. | MM | IN. | MM | IN. | MM | |
DCAP-400 | 3.0 | 2.50 | 0.40 | 10.2 | 0.15 | 3.80 | 0.080 | 2.0 | .18-.34 | 4.5-8.5 |
DCAP-750 | 3.5 | 2.50 | 0.75 | 19.0 | 0.22 | 5.60 | 0.080 | 2.0 | .24-.65 | 6.0-16.5 |
DCAP-1100 | 4.0 | 3.00 | 1.10 | 27.9 | 0.40 | 10.20 | 0.080 | 2.0 | .45-1.00 | 11.5-25.0 |
DCAP-1300 | 4.0 | 3.00 | 1.30 | 33.0 | 0.40 | 10.20 | 0.080 | 2.0 | .45-1.20 | 11.5-30.0 |
DCAP-1500 | 4.5 | 3.25 | 1.50 | 38.1 | 0.50 | 12.70 | 0.080 | 2.0 | .55-1.40 | 14.0-35.0 |
DCAP-1700 | 4.5 | 3.25 | 1.70 | 43.2 | 0.50 | 12.70 | 0.080 | 2.0 | .55-1.60 | 14.0-40.0 |
DCAP-2050 | 4.5 | 3.50 | 2.05 | 52.1 | 0.75 | 19.00 | 0.080 | 2.0 | .82-1.80 | 21.0-45.0 |
DCAP-2750 | 5.0 | 4.50 | 2.75 | 69.8 | 1.00 | 25.40 | 0.080 | 2.0 | 1.20-2.50 | 30.0-63.0 |
DCAP-3500 | 5.0 | 4.00 | 3.50 | 88.9 | 1.18 | 30.00 | 0.095 | 2.4 | 1.3-3.30 | 33.0-83.80 |
DCAP-4700 | 6.5 | 5.50 | 4.70 | 119.4 | 1.57 | 39.90 | .0105 | 2.6 | 1.6-4.50 | 40.6-114.3 |
Standard Operating Temperature: -55°C TO +110°C.
Standard Item Supplied With Adhesive.
Properties Values Test Method Typical Physical Tensile Strength ASTM-D412 2100 PSI Elongation ASTM-D412 600 (%) Specific Gravity ASTM-D792 1.10 Weather/U.V. Resist. ------------- Resists U.V. Rays Electrical Dielectric Strength ASTM-D149 500V/MIL Volume Resistivity ASTM-D257 1016OHM-CM Chemical Fluid Resistance MIL-I-23053 Good To Excellent Fungus Resistance ASTM-G21 No Growth Water Absorption ASTM-D570 0.1 (%)
Values | Test Method | Typical |
---|---|---|
Physical | ||
Tensile Strength | ASTM-D412 | 2100 PSI |
Elongation | ASTM-D412 | 600 (%) |
Specific Gravity | ASTM-D792 | 1.10 |
Weather/U.V. Resist. | ------------- | Resists U.V. Rays |
Electrical | ||
Dielectric Strength | ASTM-D149 | 500V/MIL |
Volume Resistivity | ASTM-D257 | 1016OHM-CM |
Chemical | ||
Fluid Resistance | MIL-I-23053 | Good To Excellent |
Fungus Resistance | ASTM-G21 | No Growth |
Water Absorption | ASTM-D570 | 0.1 (%) |