PSP

Equipment shelves are an ideal solution for mounting any non-rack mount equipment within a rack or cabinet. Universally mountable in any standard 19in server rack or cabinet, these shelves come in a variety of configurations including: fixed, sliding,...

These black plastic rings flex at the end for easy insertion or removal of cross connect cables. They snap in place on the front and back of the Mighty Mo racks. Black. Features Promotes efficient routing of patch and cross...

SHELF,ADJUSTABLE MTG 30.25" BK

Legrand mounting screws replace lost or damaged screws for patch panels and cable management panels. These combination head screws with #12-24 threads have a pilot point for easy starting. Black. Features Replaces lost screws or need for...

Legrand  double equipment shelf supports miscellaneous equipment, test gear, etc. The double shelves work with Mighty Mo racks with 6.5” deep channels. Shelf widths are available in 17”, 18.75” and 21.37”...

Legrand hinged wall mount brackets meet smaller system requirements and allow easy access to the rear of the panels. Holes in back allow for rear cable feed through. These brackets are available in four heights, with 19 in #12-24 threaded EIA...

Legrand hinged wall mount brackets meet smaller system requirements and allow easy access to the rear of the panels. Holes in back allow for rear cable feed through. These brackets are available in four heights, with 19 in #12-24 threaded EIA...

Legrand hinged wall mount brackets meet smaller system requirements and allow easy access to the rear of the panels. Holes in back allow for rear cable feed through. These brackets are available in four heights, with 19 in #12-24 threaded EIA...

These horizontal cable managers with feed-through openings provide organized routing and management for cables within the rack.  

Legrand hinged wall mount brackets meet smaller system requirements and allow easy access to the rear of the panels. Holes in back allow for rear cable feed through. These brackets are available in four heights, with 19 in #12-24 threaded EIA...

Legrand equipment shelf supports miscellaneous equipment or test gear. Can be mounted on standard 19” EIA racks. Inside shelf width is 17”. Black. Features Holds up to 75 lbs: Supports miscellaneous equipment or test gear,...

Legrand equipment shelf supports miscellaneous equipment or test gear. Can be mounted on standard 19” EIA racks. Inside shelf width is 17”. Black. Features Holds up to 75 lbs: Supports several small pieces of equipment (17...

SUP BRACKET,P 1X1.72X19 W/HW, BK

Legrand double equipment shelf supports miscellaneous equipment, test gear, etc. The double shelves work with Mighty Mo racks with 6.5” deep channels. Shelf widths are available in 17”, 18.75” and 21.37”. Black...

These black plastic rings flex at the end for easy insertion or removal of cross connect cables. They snap in place on the front and back of the Mighty Mo racks. Black. Features Promotes efficient routing of patch and cross connect cables Snap in...

These black plastic rings flex at the end for easy insertion or removal of cross connect cables. They snap in place on the front and back of the Mighty Mo racks. Black. Features Promotes efficient routing of patch and cross connect...

Cable management support bars ensure excess tension is not placed on jacks or terminations and help with routing cables within a rack or cabinet. Features Curved falls: Prevent distribution cable from crimping and maintains a proper bend...

Legrand bend limiting cable management panels have curved falls that protect against cable crimping and also maintain proper bend radius. The panels are ideal at the top of standard 19” EIA racks. Black...

Cable Management Panel, three horizontal distribution rings 1.7 H x 2.5" D, two vertical distribution rings 2.25" W x 2.5" D, 1 rack unit (1.75" x 19"), black Features Provides organized management of patch cables horizontally: Eliminates...

Cable Management Panel, five horizontal distribution rings 1.7 H x 3.5" D, 1 rack unit (1.75" x 19"), black Features Provides organized management of patch cables horizontally Rings made out of steel Maximum ring fill capacity using Category 6...

Five horizontal distribution rings,1.7" H x 3.5" D, four 1" x 2" cutouts, 1 rack unit (1.75" x 19"), black Features Provides organized management of patch cables horizontally and front to back Rings made out of steel Maximum ring fill capacity...

Ortronics bend limiting cable management panels have curved falls that protect against cable crimping and also maintain proper bend radius. The panels are ideal at the top of standard 19" EIA racks. 3.5" H x 6" D rings with waterfall, 4.84" H x 19" W, 2...

Ortronics bend limiting cable management panels have curved falls that protect against cable crimping and also maintain proper bend radius. The panels are ideal at the top of standard 19" EIA racks. 3.5"H x 3.5"D rings with waterfall, 2 rack units, black...

Legrand bend limiting cable management panels have curved falls that protect against cable crimping and also maintain proper bend radius. The panels are ideal at the top of standard 19" EIA racks. 7" H x 7" D rings with waterfall, 8.34" H x 19" W, 4 rack...

These rings allow efficient routing of patch or cross connect cables between distribution racks. They can be mounted where needed on the front and back of the Mighty Mo racks. Black. Features Promotes efficient routing of patch or cross connect...

These horizontal cable managers provide organized routing and management for cables within the rack. Panels are available in a variety of configurations to accommodate different densities, rack unit sizes and ring layouts. Features Provides organized...

Ortronics bend limiting cable management panels have curved falls that protect against cable crimping and also maintain proper bend radius.  7" H x 7" D rings with waterfall, 8.34" H x 19" W, 4 rack units, black...

Cable management support bars ensure excess tension is not placed on jacks or terminations and help with routing cables within a rack or cabinet. Features Provides strain relief at the rear of a standard 19" rack for horizontal wiring cables that are...

These black plastic rings flex at the end for easy insertion or removal of cross connect cables. They snap in place on the front and back of the Mighty Mo racks. Black. Features Promotes efficient routing of patch and cross connect cables Snap in...

This spool has a #12-24 stud molded in place and can be threaded into the EIA holes on any Ortronics rack. Use it to mount cable management panels, patch panels or screw it in anywhere additional cable management is desired. Black. Features Can...

This kit provides a reliable systems bond for the distribution rack. One bonding kit is recommended for each rack. Features Accepts 6 AWG to 14 AWG conductors Mounting hardware included

Equipment shelves are an ideal solution for mounting any non-rack mount equipment within a rack or cabinet. Universally mountable in any standard 19in server rack or cabinet, these shelves come in a variety of configurations including: fixed, sliding,...

Blank filler panels fill in open spaces on all standard 19 in EIA racks and cabinets. They are made of aluminum with a durable powder coated finish. Features Fills in unused rack units in 19" racks or Cabinets: Gives a finished look: Aluminum with...

Blank filler panels fill in open spaces on all standard 19 in EIA racks and cabinets. They are made of aluminum with a durable powder coated finish. Features Fills in unused rack units in 19" racks or Cabinets: Gives a finished look: Aluminum with...

Blank filler panels fill in open spaces on all standard 19 in EIA racks and cabinets. They are made of aluminum with a durable powder coated finish. Features Fills in unused rack units in 19" racks or Cabinets: Gives a finished look: Aluminum with...

Blank filler panels fill in open spaces on all standard 19” EIA racks and cabinets. They are composed of black powder coated aluminum and have a blue silkscreened logo. Includes #12-24 mounting hardware. Black.  Features Fills in unused...

Slitted protective sleeves cover threaded rods to protect cables from damage. Field cut to desired size. Features Protective Sleeve over threaded rods protects cables from damage

Protective end caps conceal sharp runway edges that may harm the installation or injure those administering the installation. Sold in pairs.

The Legrand computer-guided manufacturing process assures that each rack meets exact dimensions, guaranteeing a self-squaring assembly. Made of top quality 6061-T6 structural grade aluminum, Legrand equipment racks provide strength and stability for...

96" ADJ DUAL RACK 21 - 32" DEPTH Features Swing-EZ Wall Racks offer flexibility. Front swing gate with latch pins and bolts on both sides:Allows you to open swing gate either left or right and easy access to rear of panels and equipment. #12-24...