LEGRAND

The 100G QSFP28 Passive Direct Attach Copper Twinax Cable provides a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. This Direct Attach Copper is compliant with IEEE 802.3,...

The 100G QSFP28 Passive Direct Attach Copper Twinax Cable provides a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. This Direct Attach Copper is compliant with IEEE 802.3,...

The 100G QSFP28 Passive Direct Attach Copper Twinax Cable provides a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. This Direct Attach Copper is compliant with IEEE 802.3,...

The 100G QSFP28 Passive Direct Attach Copper Twinax Cable provides a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. This Direct Attach Copper is compliant with IEEE 802.3,...

The 100G QSFP28 Passive Direct Attach Copper Twinax Cable provides a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of switches within racks and across adjacent racks. This Direct Attach Copper is compliant with IEEE 802.3,...

This is a third-party compatible SFP+ DAC for ZYX DAC10G-5M. It provides high performance and cost-effective SFP+ direct attach copper cable with a length of 5 meters (16 ft). It supports the bandwidth transmission requirements as defined by 10...

Cisco compatible SFP transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP transceiver supports up to 80km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Dell compatible SFP transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Dell switches, routers, servers, network interface card...

Cisco compatible SFP transceiver supports up to 80km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP transceiver supports up to 80km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP transceiver supports up to 80km link lengths over single-mode fiber (SMF) via an LC duplex connector. Each SFP transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface...

Cisco compatible SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8472 MSA standards. Digital diagnostics functions are available via a 2-wire...

Cisco comp X2 to SFP port converter

The Cisco CVR-QSFP-SFP10G Compatible QSFP+ to SFP+ adapter converter module provides conversion from QSFP+ to SFP+ form factors. This module is compliant with IEEE 802.3bj, IEEE-802.3 and SFF-8436, SFF-8431 standards. The built-in digital diagnostics...

This MSA Compliant CFP2 transceiver provides 100GBase-LR4 throughput up to 10km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested...

This MSA Compliant CFP transceiver provides 100GBase-LR4 throughput up to 10km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to...

This is a Dell Force10 CBL-10GSFP-DAC-5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 5.0m (16.4ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

4M Dell Comp 10G SFP+ PDAC

This is a Dell Force10 CBL-10GSFP-DAC-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

2M Dell Comp 10G SFP+ PDAC

This is a Dell Force10 CBL-10GSFP-DAC-1M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.28ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

15M Dell Comp 10G SFP+ ADAC

This is a Dell Force10 CBL-10GSFP-DAC-10M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over active copper with a maximum reach of 10.0m (32.81ft). It has been programmed, uniquely serialized, and data-traffic and application...

This is a Dell Force10® CBL-10GSFP-DAC-0.5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 50cm (1.64ft). It has been programmed, uniquely serialized, and data-traffic and application...

The Arista Networks CAB-S-S-25G-5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3 by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

The Arista Networks CAB-S-S-25G-4M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3 by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

The Arista Networks CAB-S-S-25G-3M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

3.35M Arista Comp 25G SFP28 PDAC

The Arista Networks CAB-S-S-25G-2.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

The Arista Networks CAB-S-S-25G-2.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

11F Arista Comp 25G SFP28 PDAC

The Arista Networks CAB-S-S-25G-1.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector...

This is an Arista Networks CAB-SFP-SFP-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

This is an Arista Networks CAB-SFP-SFP-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

This is an Arista Networks CAB-SFP-SFP-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

This is an Arista Networks CAB-SFP-SFP-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...

This is an Arista Networks CAB-SFP-SFP-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.84ft). It has been programmed, uniquely serialized, and data-traffic and application tested...