Description
The Steadicam Series from Camplex series features 4.2mm diameter hybrid fiber cable, half the size of traditional studio SMPTE, and an allowable minimum bend radius of 1 inch. This makes these cables especially well suited for jib operators, portable broadcast cameraman and patch panels scenarios where weight bend radius are often a consideration.
These special fiber/copper composite cables consist of two tight buffered singlemode optical fibers. These are cabled around a jacketed stranded steel strength element, with an overall tinned copper braid, 80% min coverage, and a black Dura-FlexTM jacket. Terminated in our LEMO Certified shop with FUW and PUW connectors, the HF-STEADICAM is a reliable short distance interface between the camera and standard SMPTE cables for transmitting signal.
NOTE: Check camera and Steadicam platform type to determine power cable requirements before ordering. Camplex HF-STEADICAM SMPTE jumpers are designed to operate with local power. These assemblies use lighter AWG power conductors and may not be suitable for all applications where the power is provided by the CCU.. Contact us for technical support.
-
Features:
- Lightweight and flexible
- SMPTE hybrid electrical and fiber optical camera cable
- Rugged LEMO push-pull self-latching connectors with dust caps
- Low insertion and return loss (test documentation available on request)
- Cut through and water-resistant polyurethane jacketed cables
- Terminations by LEMO Certified Technicians
NOTE: Maximum available length is 10 feet. See HF-FUWPUW-7 for any length over 10 feet.
-
Specifications:
- M97176 Mohawk 4.2mm SMPTE Hybrid Copper/Fiber Optic Cable
- LEMO 3K.93C connector assembly and test standard.
- Electrical assemblies 100% tested for continuity and shorts
- Fiber optic assemblies 100% tested for attenuation and back reflection
