ACTIVE NETWORK

This is an Intel XDACBL3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.8ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is...

The Cisco XFP Module (Figure 1) offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications. Features: Supports...

The 10GBASE-SR XFP is dedicated to Ethernet applications only. It supports a link length of 26m on standard FDDI-grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700MHz*km...

The Cisco Multirate - XFP transceiver module - SONET/SDH, 10 GigE - 10GBase-LR, 10GBase-LW - LC single-mode XFP10GLR-192SRL-RF is a transceiver module offers a 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center,...

Ciena XCVR-S10V31 compatible SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. This transceiver is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial...

This Ciena XCVR-B00G85 compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Ciena transceiver. This...

This Ciena XCVR-B00CRJ compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C...

The Ciena 1000Base EX, 40 Km, 1310 nm SFP is guaranteed 100% Compatible and Functional in its intended equipments. Every XCVR-A40Y31 is environmentally tested in its specific port/platform prior to shipping to ensure that they are in perfect physical and...

This SFP module is suitable for use with Ciena networking equipment and is equivalent to genuine part number XCVR-A10Y31. It is programmed and tested at the factory, to ensure working with Ciena Gigabit Ethernet switches, Routers, fiber...

Brocade XBR-000153 Compatible 8G Fibre Channel SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features: Max. Power Consumption 1W Tested in Targeted Switches for Superior Performance, Quality, and Reliability FC-PI-4 Compliance for 8.5/4...

Brocade XBR-000139 Compatible 4G Fibre Channel SFP Transceiver Module (MMF, 850nm, 150m, LC, DOM) Features: Tested in Targeted Switches for Superior Performance, Quality, and Reliability FC-PI-2 Compliance for 1.0625/2.125/4.25 Gbit/sec...

This 100G QSFP28 passive copper cable is compatible with NetApp 100Gb/s networking equipment in the data center and equivalent to NetApp X66211A-1. It is suitable for very short distances and offers a highly cost-effective way to establish a 100 Gigabit...

This NetApp X6568-R6 Compatible 1000BASE-T SFP transceiver is suitable for use with NetApp networking equipment. It has been programmed and tested at the factory, to ensure working with NetApp Gigabit Ethernet switches, Routers, network interface cards...

The Intel X4DACBL5 Compatible 40G QSFP+ to 4 x 10G SFP+ Direct Attach Cable operates over passive copper, which requires no additional power to ensure quality connectivity. This breakout cable is compliant with SFF-8436, SFF-8431 and SFP+ & QSFP MSA...

2M MSA Comp 400G QSFPDD to 8xSFP56 PDAC

2.5M MSA Comp 400G QSFP-DD 8x SFP56 PDAC

1M MSA Comp 400G QSFP-DD to 8xSFP56 PDAC

The QSFP+ module is designed for use in 40GBASE Ethernet throughput up to 2km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. This transceiver is compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-LR4 standard. Digital...

Viptela Comp 1G SFP LX 10km Transceiver

SFP/SFP+ Modules and Cabling Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades. Outdoor Fiber Installations For long-distance runs of 300+ meters, use...

SFP, 1310nm LX SMF 10km 1G Ubiquiti Comp

Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades. Outdoor Fiber Installations For long-distance runs of 300+ meters, use U Fiber 1G or 10G single-mode...

To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100 m. For short...

Ubiquiti UF-RJ45-10G compatible SFP+ transceiver provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector. This transceiver is compliant with IEEE 802.3an, IEEE 802.3az, SFF-8431 and SFP+ MSA. Each SFP+ transceiver module...

SFP/SFP+ Modules and Cabling Ubiquiti Networks offers a variety of U Fiber™ modules and single-mode fiber cabling for your new installs and existing infrastructure upgrades. Outdoor Fiber Installations For long-distance runs of 300+ meters, use...

The UDC-3 from Ubiquiti is a 10G SFP+ direct attach passive copper cables support multi-gigabit data rates of up to 10.5 Gbps. The SFP+ direct attach passive copper cables are ideal for indoor telecommunications and data networks using our routing and...

The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a...

Features: Cable Length: 3.28 ft Product Type: Network Cable Data Transfer Rate: 10 Gbit/s Device Supported: Network Device Manufacturer Part Number: UDC-1-L Manufacturer: Legrand Group Product Name: Network Cable Brand Name: Legrand  

The UniFi SFP+ DAC Patch Cable from Ubiquiti is a passive Direct Attach Cable with male SFP+ optical connectors at each end. The 1.6'-long, 0.16"-thick, 30 AWG cable carries up to 10 Gb/s over 10GbE networks...

0.5M UBIQUITI COMP 10G SFP+ PDAC

The TN-SFP-SX Small Form Factor Pluggable (SFP) transceivers are designed for bi-directional serial optical data communications such as Gigabit Ethernet or Fiber Channel and speeds up to 2.5Gbps.  

The Transition Networks TN-GLC-SX-MMD small form factor pluggable (SFP) transceiver modules are designed to install in any SFP port allowing for 1000Base-T, 1000Base-SX or 1000Base-LX interfaces to the network through the SFP connector. The...

Cisco Compatible Gigabit SFP Modules 1000Base-LX Single Mode (LC) Features: Extended operating temperature -40°C to +85°C (TN-GLC-xxx-RGD Module Only)

Transition TN-10GSFP-SR compatible SFP+ SR module is suitable for use with Transition 10G network equipment. It supports data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode fiber cable. The module is programmed to work...

The TL-SM311 series Fiber Module Cards are introduced to extend transferring distance. Installed in our managed/smart switches, they can extend the distance to even tens of kilometers, which basically satisfy the distance requirement of LAN...

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement...

The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and...

TRENDnet’s SFP Multi-Mode LC Module, model TEG-MGBSX, are compatible with standard SFP slots found on network switches and fiber media converters. The Multi-Mode SFP LC module is equipped with a duplex LC fiber connection interface, and supports...

The TEG-MGBS10 Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. This Single Mode LC Type module spans distances up to 10km (6.2 miles) and includes 1 x 1000Mbps-LX (LC-Type) Mini-GBIC connector. Features: Mini-GBIC...

This pluggable 1000BASE-LX SFP SMF is a Fiber transceiver compatible with TRENDnet® switch architectures, providing blazing fast 1000Base speeds over 10km to upgrade your fiber optic network's speed, bandwidth, and expandability in the widely popular...