M12 8 Position IP67 X-Coded Male Straight to RJ45 IP20 (Custom) - Made in USA

Product Description

Need a custom length or want to get exact lead-time?

Please Contact - customerservice@americancableassemblies.com

Or Call (413) 283-2515 M-F 8-5pm EST (Live Person Answers the phone)

Assembled in our ISO certified facility in Palmer MA

Product specification of M12 Connector

• M12 Cat.6A X-coded plug based on IEC PAS 61076-2-109 and suitable for field assembly
• Suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
• Suitable for a 8-wire M12 plug for AWG 22 connection of AWG 26/1 - 22/1, AWG 26/7 - 22/7 possible
• Solid copper wire diameter from 0.4 to 0.64 mm
• Stranded copper wire diameter from 0.48 to 0.76 mm core diameter up to 1.6 mm • cable jacket from 6.0 to 9.7 mm consists of only 2 parts
• Easy assembly - connection without special tools • zinc die-cast housing for industrial use • suitable for applications in the railway industry according to data sheet

Tech Specs on M12 Connector - Click Here

Product specification of RJ45 Connector

• Eight conductor modular plug
• For conductors with an o.d. range of .044-.048
• Uses .012 contact
• Product requires conductive load bar
• For cat 6 patch cord applications
• For solid or stranded wire applications

Tech Specs on RJ45 -  Click Here

Product specification of Cable 

Construction Details

• Pair Count: 4
• AWG: 24
• Solid/Stranded: Stranded
• Stranded Copper: 7/32
• Insulation: High Density Polyethylene, .011"
• Shield: Yes
• Jacket Type: TPE
• Jacket Color: Teal
• Overall Diameter: .325"
• Other Details: Spline Braid

Ratings and Approvals

• CM
• CMX Outdoor
• RoHS Compliant: Yes
• Physical Properties
• Temp Max.: 75 & 80
• Temp Min.: -40
• Voltage Rating Max.: 600
• Notes
• Tested To: 500 MHz

Tech Specs on Cable -  Click Here

100% continuity tested.  Fluke Test available upon request.

IP Rating

The IP Code, International Protection Marking, IEC standard 5925, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The equivalent European standard is EN 5925.

The digits indicate conformity with the conditions summarized in the tables below. The digit 0 is used where no protection is provided. The digit is replaced with the letter X when insufficient data has been gathered to assign a protection level.

The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

The second digit indicates the level of protection that the enclosure provides against harmful ingress of water.^[3] The ratings for water ingress are not cumulative beyond IPX6. A device which is compliant with IPX7, covering immersion in water, need not be compliant with IPX5 or IPX6, covering exposure to water jets. A device which meets both tests is indicated by listing both tests separated by a slash, e.g. IPX5/IPX7.